• Print Print

UMB202 Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
No edit summary
 
(22 intermediate revisions by one other user not shown)
Line 1: Line 1:
<noinclude>
<noinclude>
{{Sticky_Menu_VPC3x_Series
<div class="noprint">
|1=UMB202_Introduction
<div style="top:1px;width:auto;" class="nomobile">
|2=UMB202_Initial_Setup
<div class="grid-container">
|3=UMB202_Making_Connections
  <div class="item1" style="text-align:center; font-size:16; background-color:#DB0025; font-weight:bold; color:#ffffff;">{{PAGENAME}}</div>
|4=UMB202_Using_the_Device
  <div class="grid-item">[[UMB202_Introduction|Introduction]] </div>
|5=UMB202_Appendix
  <div class="grid-item">[[UMB202_Initial_Setup|Installing the Camera]] </div>
|6=UMB202_Regulatory_and_Service_Information
  <div class="grid-item">[[UMB202_Making_Connections|Making Connections]]</div>
}}
  <div class="grid-item">[[UMB202_Appendix|Appendix]]</div>
  <div class="grid-item">[[UMB202_Regulatory_and_Service_Information|Regulatory and Service Information]]</div>
  <div class="grid-item">[[UMB202_Troubleshooting|Troubleshooting]]</div>
</div>
</div>
</div>
</noinclude>
</noinclude>
=Wall Mounting=
=Wall Mounting=
<div class="res-img">[[File:UMB202_Wall_Mount.png|600px]]</div>
<div class="res-img">[[File:UMB202_Wall_Mount.png|600px|alt=Mounting the camera to the wall]]</div>
#Pre-drill three holes into the wall and install the three wall anchors.
#Pre-drill three holes into the wall and install the three wall anchors.
#Align the wall bracket with the three anchors and secure the wall bracket with the three bracket screws.
#Align the wall bracket with the three anchors and secure the wall bracket with the three bracket screws.
#Secure the camera to the mounting plate.
#Secure the camera to the mounting plate.
#
#Attach the mounting plate to the wall bracket to complete the installation.
Attach the mounting plate to the wall bracket to complete the installation.
{{Note|When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.}}
{{Note|When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.}}


=VB-WMK-002 Mounting=
=VB-WMK-002 Mounting=
==Package Contents==
==What You Need==
<gallery>
<gallery widths=300px mode="nolines">
UMB202 Components.png |UMB202
UMB202 Components.png |<div style="font-style:normal; text-align:center;">UMB202</div>
VB-WMK-002 Components.png |VB-WMK-002
VB-WMK-002 Components.png |<div style="font-style:normal; text-align:center;">VB-WMK-002</div>
</gallery>
</gallery>


{{Note|Some parts are optional accessories included in other ViewSonic products. Please refer to our website for more information}}
{{Note|Some parts are optional accessories included in other ViewSonic products.}}
 
==Mounting the Camera onto VB-WMK-002==
==Mounting the Camera onto VB-WMK-002==
<div class="res-img">[[File:VB-WMK-002_Mount.png|600px]]</div>
<div class="res-img">[[File:VB-WMK-002_Mount.png|600px|alt=Mounting the camera to the ViewSonic's TV Mount]]</div>
{{Note|When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.}}


#Line up the mounting plate with the VB-WMK-002.
#Line up the mounting plate with the VB-WMK-002.
#Attach the mounting plate to the VB-WMK-002 with the screws.
#Attach the mounting plate to the VB-WMK-002 with the screws.
#Secure the camera to the mounting plate.
#Secure the camera to the mounting plate.  
{{Note|For more information, refer to the VB-WMK-002 user guide.}}
{{Note|When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.}}
 
=Mounting UMB202 and VB-WMK-002 onto an IFP=
=Mounting UMB202 and VB-WMK-002 onto an IFP=
After installing the UMB202 onto the VB-WMK-002, it can be set on an IFP as shown in the image below.
<p>After installing the UMB202 onto the VB-WMK-002, it can be set on the top or bottom of an ViewBoard.</p>
<gallery>
<gallery widths=400px mode="nolines">
UMB202 On Top IFP.png|On the Top
UMB202 On Top IFP.png|On the Top
UMB202 On Bottom IFP.png|On the Bottom
UMB202 On Bottom IFP.png|On the Bottom
</gallery>
</gallery>
{{Note|Please refer to the Compatibility List on page 18 or contact our local service provider for more information.}}
{{Note|To decide which of the mounting locations is compatible with your ViewBoard, please refer to the [[UMB202_Appendix#Compatibility List|Compatibility List]] or contact our local service provider for more information.}}


{{#seo:
{{#seo:

Latest revision as of 02:59, 27 September 2024

UMB202 Initial Setup
Introduction
Installing the Camera
Making Connections
Appendix
Regulatory and Service Information
Troubleshooting

Wall Mounting

Mounting the camera to the wall
  1. Pre-drill three holes into the wall and install the three wall anchors.
  2. Align the wall bracket with the three anchors and secure the wall bracket with the three bracket screws.
  3. Secure the camera to the mounting plate.
  4. Attach the mounting plate to the wall bracket to complete the installation.
Note: When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.

VB-WMK-002 Mounting

What You Need

  • UMB202
    UMB202
  • VB-WMK-002
    VB-WMK-002
Note: Some parts are optional accessories included in other ViewSonic products.

Mounting the Camera onto VB-WMK-002

Mounting the camera to the ViewSonic's TV Mount
  1. Line up the mounting plate with the VB-WMK-002.
  2. Attach the mounting plate to the VB-WMK-002 with the screws.
  3. Secure the camera to the mounting plate.
Note: When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.

Mounting UMB202 and VB-WMK-002 onto an IFP

After installing the UMB202 onto the VB-WMK-002, it can be set on the top or bottom of an ViewBoard.

  • On the Top
    On the Top
  • On the Bottom
    On the Bottom
Note: To decide which of the mounting locations is compatible with your ViewBoard, please refer to the Compatibility List or contact our local service provider for more information.
Retrieved from "https://manuals.viewsonic.com/index.php?title=UMB202_Initial_Setup&oldid=51446"