TD3207 Connecting Power and Devices

    From ViewSonic User Guide Database

    Connecting to Power

    Connecting to Power
    1. Connect the power cord to the power adapter.
    2. Connect the power adapter to the DC IN jack at the rear of the monitor.
    3. Connect the power cord to a power outlet.

    Connecting External Devices

    Note: To connect the monitor to an external device (PC, laptop…etc.), please use one of the included video cables for your application and connect it to both terminals.

    DisplayPort

    Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the cable to the DisplayPort or mini DP port of your computer.

    NOTE: To connect the monitor to the Thunderbolt port (v. 1&2) on your Mac, connect the mini DP end of the “mini DP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.

    HDMI

    Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.

    USB

    Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.

    USB Number Description
    Type B One (1) Connect the USB Type B male cable (square with 2 cut corners) to this port, and then connect the other end of the cable to the USB downstream port of your computer.

    Audio

    Plug an audio cable into the Audio Out port of the monitor. Plug the other end into your ear-/headphones.

    NOTE: The monitor is also equipped with dual speakers.

    RS-232

    Connect one end of a RS-232 cable to the RS-232 port. Then connect the other end of the cable to the RS-232 port of your computer.

    Touch Function Control

    Before using the touch function, ensure the USB Type B to Type A cable is connected to your computer and the Windows operating system is running.

    TD3207 Touch Control.svg

    When using the touch function, please note:

    • The touch function may need about five (5) seconds to resume if the USB cable is removed and plugged in again, or the computer resumes from Sleep Mode.
    • The touchscreen can only detect up to ten (10) fingers simultaneously.
    • If the Windows’ cursor does not accurately follow your finger when you touch the screen, do the following:
    1. Open: Control Panel > Hardware and Sound >Tablet PC Settings
    2. Select Calibration.
    3. Follow the instructions to recalibrate your screen.