From ViewSonic User Guide Database
TD2465 On-Screen Display Menu Tree
| Sub-menu
|
Menu Option
|
| Auto Image Adjust
|
|
| Contrast/Brightness
|
Contrast
|
(-/+, 0~100)
|
|
| Brightness
|
(-/+, 0~100)
|
| Input Select
|
VGA
|
|
| DisplayPort
|
| HDMI
|
| Audio Adjust
|
Volume
|
(-/+, 0~100)
|
|
| Mute
|
On
|
|
| Off
|
| Audio Input
|
HDMI
|
| Audio In
|
| Color Adjust
|
sRGB
|
|
| Bluish
|
| Cool
|
| Native
|
| Warm
|
| User Color
|
Red
|
(-/+, 0~100)
|
| Green
|
(-/+, 0~100)
|
| Blue
|
(-/+, 0~100)
|
| Color Space
|
Auto
|
|
| RGB
|
(-/+, 0~255)
|
| RGB
|
(-/+, 16~235)
|
| YCC
|
(-/+, 0~255)
|
| YCC
|
(-/+, 16~235)
|
| Information
|
|
| Manual Image Adjust
|
H/V Position
|
Horizontal Position
|
(-/+, 0~100)
|
| Vertical Position
|
(-/+, 0~100)
|
| Horizontal Size
|
(-/+, 0~100)
|
|
| Fine Tune
|
(-/+, 0~100)
|
| Sharpness
|
(-/+, 0~100)
|
| Dynamic Contrast
|
On
|
| Off
|
| Response Time
|
Standard
|
| Advanced
|
| Ultra Fast
|
| Aspect Ratio
|
4:3
|
| Full Screen
|
| Overscan
|
On
|
| Off
|
| ECO Mode
|
Standard
|
| Optimize
|
| Conserve
|
| Blue Light Filter
|
(-/+, 0~100)
|
| Setup Menu
|
Language Select
|
English
|
|
| Français
|
| Deutsch
|
| Español
|
| Italiano
|
| Suomi
|
| Русский
|
| Türkçe
|
| 日本語
|
| 한국어
|
| 繁體中文
|
| 简体中文
|
| Česká
|
| Svenska
|
| Resolution Notice
|
On
|
|
| Off
|
| OSD Position
|
H. Position
|
(-/+, 0~100)
|
| V. Position
|
(-/+, 0~100)
|
| OSD Pivot
|
0°
|
|
| +90°
|
| -90°
|
| OSD Timeout
|
(-/+, 5/15/30/60)
|
|
| OSD Background
|
On
|
|
| Off
|
| Auto Power Off
|
On
|
|
| Off
|
| Sleep
|
30 minutes
|
|
| 45 minutes
|
| 60 minutes
|
| 120 minutes
|
| Power Indicator
|
On
|
|
| Off
|
| Boot Up Screen
|
On
|
|
| Off
|
| Touch Screen[1]
|
Single Point Touch
|
On
|
| Off
|
| Glove Touch Mode[2]
|
On
|
| Off
|
| Water Resistant Touch Mode[2]
|
On
|
| Off
|
| Touch Disable
|
On
|
| Off
|
| Pen Touch Mode
|
On
|
| Off
|
| Memory Recall
|
|
- ↑ When switching between modes, or when you want to cancel Touch Mode, please clean the surface of the device first and keep the surface clean from water droplets and fingerprints.
- ↑ 2.0 2.1 Pen Touch Mode, Glove Touch Mode and Water Resistant Touch Mode cannot be turned on at the same time.
Touch Screen Modes - Additional Information
| Mode
|
Note
|
| Pen Touch Mode
|
- Pencil touch support (2 mm).
- Stylus touch support (3.5 mm).
- Supports various active pens and click touch:
- MPP 2.0
- Apple
- Wacom AES
- Google USI
- Supports pen click and basic writing. Do not write too quickly.
- Supports palm rejection (25 mm x 25 mm).
- When a pen and a finger are both on the TD2465, only the pen signal will be detected. Handwriting and pen writing cannot operate at the same time.
- Does not support touch input with wet hands.
Does not support active pen protocol or pressure levels.
|
| Glove Touch Mode
|
- Supports various types of glove material.
- NOTE: Supported glove material can be found on the TD2465 product page.
- Supports one finger touch and click, or two fingers gesture; up to 5-point touch.
- Do not move your finger(s) too quickly.
- Gloves should be fitted and close to your fingers.
- Palm rejection is not supported.
|
| Water Resistant Touch Mode
|
- Touch supported even with some moisture on the screen.
- A moving water droplet will not cause an incorrect input.
- Supports one finger touch and click; up to 5-point touch.
- Do not move your finger(s) too quickly.
- Palm rejection is not supported.
|
