M1+ G2 Connecting Power and Devices

Connecting to Power

DC Power (Power Outlet)

1. Connect the power cord to the power adapter.
2. Connect the power adapter to the DC IN jack at the side of the projector.
3. Connect the power cord plug to a power outlet. When connected, the status LED will turn red.

NOTE: Charge the projector for 4.5 hours via the power adapter before using it in battery mode for the first time.

Power on by Power Bank Function

The projector can also be powered by a power bank.

To power your projector:

1. Connect one end of the USB Type-C cable to the USB-C port of the projector.
2. Connect the other end of the USB Type-C cable to the power bank.

NOTE:

• The power bank should be 45W (15V/3A) at least, and support Power Delivery (PD) protocol output. Additionally, at 15V/3A the projector can be powered on and charge simultaneously.
• Due to the IC protection mechanism, the USB-C charging function may stop briefly then continue later on.

Using the Battery

The battery level icon will show at the top right of the Home Screen. As the battery’s power level runs low, the screen will show a “low battery message”.

Battery Usage Time Information

Charging	About 4.5 hours
Usage Hours	up to 6 hours (Battery Saving)/up to 4 hours (Extended Eco)/up to 3 hours (ECO) /up to 2.5 hours (Full)
Battery Level Indicator (Charging)	During Charging: Flashing White LED light Full Charge: Solid White LED light

Connecting to External Devices

HDMI Connection

Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI port (supports HDCP 1.4/HDMI 1.4) of your projector.

USB Connection

USB Type A Connection
To enjoy photos, music, and movies, simply plug in a USB flash drive to the USB Type A port.

USB-C Connection
Connect one end of a USB Type C cable to the USB-C port of your device. Then connect the other end of the cable to the USB-C port of your projector.

NOTE:

• Ensure your USB Type C device can support video transmission.
• The connected device can also be charged (5V/2A).

microSD

To enjoy photos, music, and movies, simply plug in a microSD to the Micro SD slot.

NOTE: Only supports FAT32 format and up to 64 GB.

Wireless Screen Mirroring

Please see Wireless Screen Mirroring

Connecting to Bluetooth

Bluetooth Speaker

The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback.

• 

  Step 1 - Bluetooth

• 

  Step 2 - Select Speaker or Pairing

• 

  Step 3 - Enter Bluetooth mode

To connect and pair your device:

1. Go to: Home > Bluetooth.
2. Use the Left and Right directional buttons on the remote control to select Bluetooth Speaker or Bluetooth Pairing. Then press OK on the remote control.
3. When the dialogue box appears, select Yes and press OK on the remote control to enter Bluetooth mode.
4. A sound effect will be audible upon entering pairing mode.
5. Upon successful connection, another sound effect will be audible.

NOTE:

• Once paired, if both the projector and your device are powered On they will automatically connect via Bluetooth.
• The projector’s name will be labeled as “M1+”.

Bluetooth Out

Connect the projector to external headphones or speakers that support Bluetooth.

• 

  Step 1 - Bluetooth

• 

  Step 2 - Select Bluetooth Out

To connect and pair your device:

1. Go to: Home > Bluetooth.
2. Use the Left and Right directional buttons on the remote control to select the Bluetooth Out option.
3. The projector will search for nearby Bluetooth devices. Select your device from the list and press OK on the remote control.

NOTE: Select the refresh icon and press OK to search for Bluetooth devices again.

Connecting to Networks

Wi-Fi Connection

• 

  Step 2 - Turn On Wi-Fi

• 

  Step 3 - Select Network

• 

  Step 4 - Enter credentials

To connect to a Wi-Fi network:

1. Go to: Home > Setting > Network Settings > Wi-Fi.
2. Press Left or Right on the remote control to select On.
3. Available Wi-Fi networks will then be displayed. Select one of the available Wi-Fi networks.
4. If you connect to a secure Wi-Fi network, you must enter the password when prompted.

Custom SSID

1. Go to: Home > Setting > Network Settings > Wi-Fi.
2. Press Left or Right on the remote control to select On.
3. From the available Wi-Fi networks list select Others and press OK on the remote control.
4. Enter the SSID and select the security level.
5. Enter the password when prompted.

• 

  Step 3 - Select Others

• 

  Step 4 - Enter SSID

• 

  Step 5 - Enter Password