LDC031 On-Screen Display Menu

On-Screen Display (OSD) Menu Operation

Use the On-Screen Display (OSD) Menu to adjust various settings.

Note: The OSD Menu is only available when there is an active input source (e.g., HDMI).

To open and operate the OSD Menu:

1. Press the MENU    button on the remote control.
2. Press ▼/▲/◄/► on the remote control to select menu items or adjust values.
3. Press OK to confirm your selection.
4. Press the RETURN    button to go back to the previous menu level.
5. Press the MENU    button to exit the OSD Menu.

On-Screen Display (OSD) Menu Tree

Sub-menu	Menu Option
Brightness	(-/+, 0~100)
Contrast	(-/+, 0~100)
Sharpness	(-/+, 0~15)
Tint	(-/+, 0~100)
Color	(-/+, 0~100)
Color Temperature	Warm
	Normal
	Cool
	User
Picture Mode	Normal
	Dynamic
	Soft
	User
RGB Range	Full Range
	Limited Range
	Auto
Blue Light Filter	(-/+, 0~100)
Gamma Set	Native
	2.2
	2.4
Picture Reset	Cancel
	Reset

Sub-menu	Menu Option
Zoom Mode	Full
	Real
	Dynamic
	21:9
Screen Reset	Cancle
	Reset

Sub-menu	Menu Option
PBP Mode	Full Screen
	Dual Screen
	Tree-part Screen
	Center Screen
	Quad Screen
PBP Source
PBP Audio
PBP Reset

Sub-menu	Menu Option
PIP Mode	Top Left
	Top Right
	Bottom Left
	Bottom Right
PicMain
PicSub
PIP Audio
PIP Reset

Sub-menu	Menu Option
Treble	(-/+, 0~24)
Bass	(-/+, 0~24)
Volume	(-/+, 0~100)
Maximum Volume	(-/+, 0~100)
Minimum Volume	(-/+, 0~99)
Mute	Off
	On
Volume Control	Speaker
	SPDIF
	Headset
Audio Reset	Cancel
	Reset

Sub-menu	Menu Option
Off Time	Off
	(10 mins~240 mins)
Date and Time	Use Network-Provided Time
	Set Date Format
	Choose Time Zone
	Use 24-hour Format
Schedule	Schedule List
	Enable
	Start Time
	End Time
	Input
	Day of the Week
	Every Week
Slideshow Interval	(1s/3s/5s/10s/15s/20s/25s/30s)
OSD Turn Off	Off
	(5~120 seconds)
Information OSD	Off
	(1~60 seconds)
Time Reset	Cancel
	Reset

Sub-menu	Menu Option
Saving	Panel Saving	Off
		On
	Power Save	Sleep
		Hibernate
	Light Sensing	Off
		On
Boot	Boot On Source	Last Source
		Input
	Boot On Logo	ViewSonic
		Blue
		Black
		Custom
Signal	Auto Signal Detection	Off
		On
	No Signal Standby	(Off/0 min/5 min/15 min/30 min)
Port	HDMI with One Wire	Off
		On
	HDMI Version	1.4
		2.0
		Auto
	USB Cloning	Import
		Export
	USB Auto Play	Off
		On
Other	Switch On State	Power Off
		Last Status
		Forced On
	Language	English
		French
		Spanish
		German
		Russian
		Dutch
		Traditional Chinese
		Simplified Chinese
		Turkish
		Arabic
	Factory Reset	Cancel
		Reset
	Advanced Reset	Cancel
		Reset

Sub-menu	Menu Option
Heat Status	xx° C / xx° F
Monitor Information	Model Name
	Serial No.
	Operation Hours
	SW Version

On-Screen Display (OSD) Menu Options

Picture

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the Picture menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Brightness	Adjust the background black levels of the screen image.
Contrast	Adjust the degree of difference between the lightest and darkest parts of the picture. Changes the amount of black and white in the image.
Sharpness	Adjust the on-screen image’s clarity.
Tint	Adjust the color balance of the screen image. The higher the value, the more greenish the image becomes. The lower the value, the more reddish the image becomes.
Color	Adjust the amount of color in the on-screen image.
Color Temperature	Set how color appears on screen using the Kelvin scale.
Picture Mode	Select the mode that best fits the display’s environment.
RGB Range	Select from the following RGB Ranges. Full Range (black and white levels are full [0~255]) Limited Range (Black and white levels are limited [16~235]) Auto.
Blue Light Filter	Block high-energy blue light for a more comfortable viewing experience.
Gamma Set	Manually adjust the brightness level of the monitor’s grayscale levels.
Picture Reset	Reset the Picture settings to their default values.

Screen

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the Screen menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Zoom Mode	Set the on-screen image’s width and height.
Screen Reset	Reset the Screen settings to their default values.

Picture-by-Picture (PBP)

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the PBP menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
PBP Mode	Select the type of PBP screen: Full Dual Three-part Center Quad
PBP Source	Set the video source for the PBP.
PBP Audio	Set the audio source for the PBP.
PBP Reset	Reset the PBP settings to their default values.

Picture-in-Picture (PIP)

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the PIP menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
PIP Mode	Select the location of the PIP screen: Top Left Top Right Bottom Left Bottom Right
PicMain	Set the video input source of the main screen.
PicSub	Set the video input source of the sub-screen.
PIP Audio	Set the audio source for the PIP.
PIP Reset	Reset the PIP settings to their default values.

Audio

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the Audio menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Treble	Adjust the display’s treble level (higher-pitched sounds).
Bass	Adjust the display’s bass level (lower-pitched sounds).
Volume	Adjust the display’s sound level.
Maximum Volume	Set a maximum sound level.
Minimum Volume	Set a minimum sound level.
Mute	Turn off the display’s sound.
Volume Control	Select the audio source: The display’s Speaker SPDIF port Audio Out port
Audio Reset	Reset the Audio settings to their default values.

Time

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the Time menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Off Time	Set a time for the display to turn off.
Date and Time	Set the date and time of the display.
Schedule	Set a schedule to turn the display on and off.
Slideshow Interval	Set the time interval to change between images for a photo slide show.
OSD Turn Off	Set the length of time the OSD Menu remains on screen.
OSD Information	Set the length of time that the Volume, Brightness, and Input Source menus remain on screen.
Time Reset	Reset the Time settings to their default values.
Audio Reset	Reset the Audio settings to their default values.

Advanced

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the Advanced menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Saving	Panel Saving Reduces the risk of image burn-in when enabled.
	Power Save Reduce power consumption. Option Description Sleep Power usage is 38W. LAN control can still be used in this mode Hibernate Power usage is < 0.5W.
Boot	Boot On Source Select the input source to enter automatically after the display is turned on.
	Boot On Logo Show or hide a logo when the display is turned on.
Port	HDMI with One Wire Enable or disable CEC (Consumer Electronics Control). CEC synchronizes power on/off operation via HDMI connection. That is, if a device that also supports CEC is connected to the HDMI input of the display, when the display’s power is turned off, the power of the connected device will also be turned off automatically. Conversely, when the power of the connected device is turned on, the display’s power will be turned on automatically.
	USB Cloning Save the OSD Menu configuration to a USB storage device.
	HDMI Version Select the HDMI version.
	USB Auto Play If enabled, the display will copy media files from a connected external USB storage device to the display’s internal storage and play the media files automatically.
Other	Switch On State Select the display status for the next time the power cord is connected to a power outlet: Power Off: The display will remain off. Last Status: The display will return to the previous power status. Forced On: The display will turn on.
	Language Set the language for the OSD Menu.
	Factory Reset Reset all OSD Menu settings to their default values.
	Advanced Reset Reset the Advanced settings to their default values.

About

1. Press the MENU    button on the remote control to display the OSD Menu.
2. Then press OK or use ▼ / ▲ / ◄ / ► on the remote control to select the About menu.
3. Press ▼ / ▲ to select the menu option. Then press OK to display its sub-menu, or press ◄ / ► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Heat Status	View the maximum temperature of the display
Monitor Information	View information about the display such as: Model Name, Serial Number, Operation Hours, and Software Version.