How to Fix Cut Off Edges on a Monitor
Oct 30, 2026
Is your screen image too large, with the edges getting cropped? That's called overscan, and it's usually easy to fix. In this video, ViewSonic explains what causes it and which display settings to check from resolution and scaling. We also look at why overscan happens on modern displays, so you can get your screen looking just right.
More Videos from ViewSonic
- How to Clean an LCD Monitor the Right Way
- What Can I Do If My Monitor Shows a Black Screen?
- How to Know If Your USB-C Supports Video
- What Cable to Use for 144Hz Monitor
- Why Are Options in My On-Screen Display (OSD) Menu Grayed Out
- How to Set Up Dual Monitors on a PC or Mac
- How to Fix Monitor Flickering + Update GPU Drivers for Windows
- How to Install Monitor Drivers (Windows 10 & 11)
- How to Enable AMD FreeSync
- How to Fix Cut Off Edges on a Monitor
Transcript
[MUSIC PLAYING]
Eva: Hi! I’m Eva from ViewSonic, and I’m back to answer your questions about your displays.
Eva: Today’s question is: How do I solve the issue with cut off edges on my screen?
Eva: Sometimes, the image on your display can extend beyond the visible area of the screen, causing the edges to be cropped. This issue is called “overscan” and can be caused by settings on your computer, graphics card, or monitor. So if your image is too large or part of it is cut off around the edges, try these steps.
Super: Step 1: Set Native Resolution
Eva: First, go to your computer’s Display settings and make sure your monitor is set to its native resolution. This helps ensure the image is displayed correctly.
Super: Step 2: Adjust Scaling
Eva: Next, check the “Scaling” setting, which is found in your computer’s Display settings and make sure the recommended option is selected. You can also adjust scaling through your graphics card software. If you’re not sure where to find this setting, refer to your graphics card’s user guide for detailed instructions.
Super: Step 3: Check the Aspect Ratio
Eva: If the problem continues, open your monitor’s On-Screen Display Menu and look for an “Aspect Ratio” setting. If your monitor has this setting, change it to “Auto”.
[Disclaimer]: Note: The available settings and menu options may vary depending on your monitor model.
Super: Step 4: Turn Off Overscan
Eva: You can also look for the “Overscan” setting in the OSD Menu. If it's turned on, simply turn it off. This can often solve the problem immediately.
[Disclaimer]: Note: The available settings and menu options may vary depending on your monitor model.
Super: Step 5: Reset the Monitor
Eva: Finally, if the image still doesn’t look right, reset your monitor to its default settings. This can clear conflicting settings and give you a clean starting point.
Eva: So, why does overscan happen?
Eva: With older video equipment, overscan was commonly used to hide unwanted artifacts around the edges of an image. But with modern digital displays, you generally want the entire image to fit within the screen. That’s why checking these settings can help make sure the image is displayed at the correct size and position.
☑ Resolution
☑ Scaling
☑ Aspect Ratio
☑ Overscan
Eva: We hope these tips help you get your display looking right. Eva: If you found this video to be helpful, please hit “like,” and we’ll keep making content like this. And if you want to read more on this topic, go to our online user guides in the description below.
[MUSIC PLAYING]
Copyright© ViewSonic® Corporation, 2026. All rights reserved.
Accuracy and availability of ViewSonic® transcripts may vary. Transcript text may be revised to correct errors or match updates to video.