• Print Print

VA2233-H Connecting Power and Devices

From ViewSonic Documentation
Revision as of 09:29, 17 March 2023 by AL (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=VA2233-H_Introduction |2=VA2233-H_Initial_Setup |3=VA2233-H_Connecting_Power_and_Devices |4=VA2233-H_Adjusting_the_Viewing_Angle |5=VA2233-H_Quick_Menu |6=VA2233-H_Hot_Keys |7=VA2233-H_On-Screen_Display_Menu |8=VA2233-H_On-Screen_Display_Menu_Tree |9=VA2233-H_Specifications |10=VA2233-H_Regulatory_and_Service_Information }} </noinclude> =Connecting to Power= # Connect the power cord to the AC IN jack at the rear of the device. # P...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VA2233-H Connecting Power and Devices
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Connecting to Power

  1. Connect the power cord to the AC IN jack at the rear of the device.
  2. Plug in the power cord to a power outlet.

Connecting External Devices

Note: To connect the monitor to an external device (PC, laptop…etc.), please use one of the included video cables for your application and connect it to both terminals.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VA2233-H_Connecting_Power_and_Devices&oldid=25946"