M2e Remote Control

Overview

Remote Control

Button	Icon	Description
Power	File:M2e Power Icon.png	Turns the projector On or Off.
Source	File:M2e Source Icon.png	Displays the input source selection bar.
Focus	File:M2e Focus Icon.png	Automatically focus the image. To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.
Bluetooth	File:M2e BT Icon.png	Launch Bluetooth search.
OK	File:M2e OK Icon.png	Confirms the selection.
Up/Down/Left/Right	File:M2e Selection Icon.png	Navigates and selects the desired menu items and makes adjustments.
Setting	File:M2e Setting Icon.png	Displays the Setting menu.
Return	File:M2e Return Icon.png	Returns to the previous screen.
Home	File:M2e Home Icon.png	Access the Home screen.
Volume	File:M2e Volume Icon.png	Increase/Decrease the volume level.
Forwards/Backwards	File:M2e Forw Back Icon.png	Move content forwards/backwards.
Mute	File:M2e Mute Icon.png	Mute/unmute.
Play/Pause	File:M2e Play Icon.png	Play/Pause content.

Effective Range

IR Receiver Location

To ensure proper function of the remote control follow the steps below:

1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
2. The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.)

NOTE: Refer to the illustration for the location of the infrared (IR) remote control sensor(s).

Replacing the Batteries

1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
2. Remove any existing batteries (if necessary) and install two AAA batteries.
3. Replace the battery cover by aligning it with the base and pushing it back into position.

NOTE:

• Avoid leaving the remote control and batteries in excessive heat or a humid environment.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
• Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.