• Print Print

MPC310-W31-TU Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
VY (talk | contribs)
7,615 edits
No edit summary
VY (talk | contribs)
7,615 edits
No edit summary
Line 44: Line 44:
#Align the VESA Mounting Bracket (Wall/Table/Trolley Side) with the four Hex Nuts, then secure the VESA Mounting Bracket with four Screws (M4 x 6 mm).
#Align the VESA Mounting Bracket (Wall/Table/Trolley Side) with the four Hex Nuts, then secure the VESA Mounting Bracket with four Screws (M4 x 6 mm).
#Attach the Conferencing PC to the VESA Mounting Bracket.
#Attach the Conferencing PC to the VESA Mounting Bracket.
{{#seo:
{{#seo:
|title=ViewBoard Accessory
|title=ViewBoard Accessory
Line 51: Line 50:
|description=Installing the ViewBoard MPC310-W31-TU Conference PC.
|description=Installing the ViewBoard MPC310-W31-TU Conference PC.
}}
}}
[[Category:MPC310-W31-TU]]
[[Category:MPC310-W31-TU]]

Revision as of 04:05, 19 July 2024

MPC310-W31-TU Initial Setup
Introduction
Initial Setup
Making Connections
Using the Device
Choosing Products for Your Meeting Space
Appendix
Regulatory and Service Information
Troubleshooting

Installing the Conference PC

With the included VESA Mounting Bracket set, the Conferencing PC can be attached to a wall, table, or trolley.

Installing the VESA Mounting Bracket (PC Side) onto the Conferencing PC

Attach the VESA Mounting Bracket (PC Side) to the Conferencing PC with four Bracket Screws (M3 x 6 mm).

Installing the VESA Mounting Bracket (Wall/Table/Trolley Side) and Conferencing PC

Wall Mounting

  1. Pre-drill four holes into the wall and install four Anchors (Ø6.0 x 25 mm).
  2. Align the VESA Mounting Bracket (Wall/Table/Trolley Side) with the four Anchors, then secure the VESA Mounting Bracket with four Anchor Screws (T4 x 20 mm).
  3. Attach the Conferencing PC to the VESA Mounting Bracket.

Table Mounting

  1. Pre-drill four holes into the table and install four Anchors (Ø6.0 x 25 mm).
  2. Align the VESA Mounting Bracket (Wall/Table/Trolley Side) with the four Anchors, then secure the VESA Mounting Bracket with four Anchor Screws (T4 x 20 mm).
  3. Attach the Conferencing PC to the VESA Mounting Bracket.

Trolley Mounting

  1. Select the installation location on the trolley and make sure the space is appropriate for the Conferencing PC.
  2. Install four Hex Nuts into the oval holes of the trolley.
  3. Secure the Hex Nuts with four E-type Circlips (Ø8 ).
  4. Align the VESA Mounting Bracket (Wall/Table/Trolley Side) with the four Hex Nuts, then secure the VESA Mounting Bracket with four Screws (M4 x 6 mm).
  5. Attach the Conferencing PC to the VESA Mounting Bracket.
Retrieved from "https://manuals.viewsonic.com/index.php?title=MPC310-W31-TU_Initial_Setup&oldid=42989"