• Print Print

VG245 Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 15: Line 15:
=Installing the Stand=
=Installing the Stand=
<div><ul>
<div><ul>
<li style="display: inline-block;"><div class="res-img">[[File:VG245_VG275_Stand_Install_1.png|300px]]</div></li>
<li style="display: inline-block;"><div class="res-img">[[File:VG245_VG275_Stand_Install_1.png|250px]]</div></li>
<li style="display: inline-block;"><div class="res-img">[[File:VG245_VG275_Stand_Install_2.png|300px]]</div></li>
<li style="display: inline-block;"><div class="res-img">[[File:VG245_VG275_Stand_Install_2.png|250px]]</div></li>
<li style="display: inline-block;"><div class="res-img">[[File:VG245_VG275_Stand_Install_3.png|300px]]</div>
<li style="display: inline-block;"><div class="res-img">[[File:VG245_VG275_Stand_Install_3.png|250px]]</div>
</ul></div>
</ul></div>
<ol><li>Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray.</li>
<ol><li>Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray.</li>

Revision as of 08:54, 9 August 2023

VG245 Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Installing the Stand

  1. Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray.
  2. Remove the monitor stand’s base and neck. Align and connect the three (3) points on the monitor stand’s base with the monitor stand’s neck.
  3. Use the captured screw in the monitor stand’s base and secure it to the monitor stand’s neck.
  4. Align and slide the upper hooks of the monitor stand into the stand mounting slots.
    5. NOTE: Ensure the stand is secure and the quick release tab positively clicks into place.
  5. Using the stand’s handle, lift the device out of the box and into its upright position on a flat, stable surface.
    6. NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Removing the Stand and Mounting the Display

Refer to the table below for the standard dimensions for mounting kits.

For use only with a UL certified mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum Loading Hole Pattern (W x H) Interface Pad (W x H x D) Pad Hole Screw Specification Quantity
14 kg 75 x 75 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm 4 screws
NOTE: Mounting kits are sold separately.
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Remove the monitor stand.
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
  5. Follow the instructions that come with the mounting kit to mount the monitor.

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

Using the Security Slot
Retrieved from "https://manuals.viewsonic.com/index.php?title=VG245_Initial_Setup&oldid=29706"