• Print Print

ID1230 Using the Pen Display: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 115: Line 115:
|-|Manual Image Adjust=
|-|Manual Image Adjust=
{| class="wikitable" style="font-weight:bold; text-align:center; width:60%; background-color:#ffffff;"
{| class="wikitable" style="font-weight:bold; text-align:center; width:60%; background-color:#ffffff;"
|-
|-  
|-  
! style="background-color:#db0025; color:#ffffff;"|Sub-menu
! style="background-color:#db0025; color:#ffffff;"|Sub-menu
! style="background-color:#db0025; color:#ffffff;"|Menu Option
|-
|-
| Image Auto Adjust
| Sharpness
| style="font-weight:normal;" | (-/+, 0~100)
|-
|-
| Color Auto Adjust
| rowspan="2" | Dynamic Contrast
| style="font-weight:normal;" | On
|- style="font-weight:normal;"
| Off
|-
|-
| Reset
| rowspan="3" | Response Time
| style="font-weight:normal;" | Standard
|- style="font-weight:normal;"
| Advanced
|- style="font-weight:normal;"
| Ultra Fast
|-
|-
| Auto Power Down
| rowspan="2" | Aspect Ratio
| style="font-weight:normal;" | 4:3
|- style="font-weight:normal;"
| Full Screen
|-
| rowspan="2" | Overscan
| style="font-weight:normal;" | On
|- style="font-weight:normal;"
| Off
|-
| rowspan="3" | Eco Mode
| style="font-weight:normal;" | Standard
|- style="font-weight:normal;"
| Optimize
|- style="font-weight:normal;"
| Conserve
|-
| ViewMode
| style="font-weight:normal;" |
|-
| Blue Light Filter
| style="font-weight:normal;" | (-/+, 0~100)
|}
|}


Revision as of 09:39, 8 June 2023

ID1230 Using the Pen Display
Introduction
Making Connections
Driver Installation, Use, and Removal
Setting the Display Area
Pen Input Area Mapping
Using the Pen Display
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance


Turning the Device On/Off

  1. Ensure the display is connected properly to the computer.
  2. Press the Power key to turn on the display.
  3. To turn the display off, press the Power key again.
NOTE: The display will still consume some power as long as it is connected. If the display is not being used for a long period of time, please disconnect it.

On-Screen Display (OSD) Menu

Press the Menu key to activate the On-Screen Display (OSD) Menu.

Menu Description
Contrast/Brightness Adjust the contrast or brightness level.
Input Select Select the input source.
Color Adjust Select one of the preset color settings.
Information Displays the timing mode coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL.
Manual Image Adjust Manually set a variety of image quality adjustments.
Setup Menu Adjust On-Screen Display (OSD) settings.
Memory Recall Returns the adjustments back to factory settings.

Configuring the Settings

General Operations

  1. Press the Menu key to display the On-Screen Display (OSD) Menu.
  2. Press the ▼ or ▲ key to select the main menu. Then press the Menu key to enter the selected menu.
  3. Press the ▼ or ▲ key to select the desired menu option. Then press the Menu key to enter the sub-menu.
  4. Press the ▼ or ▲ key to adjust/select the setting. Then press the Menu key to confirm.
NOTE: Certain menu option adjustments do not require the user to press the Menu key to confirm the selection.

On-Screen Display (OSD) Menu Tree

Sub-menu Menu Option
Brightness (-/+, 0~100)
Contrast (-/+, 0~100)

Sub-menu
HDMI
Type C

Sub-menu Menu Option
sRGB
Bluish
Cool
Native
Warm
User Color Red (-/+, 0~100)
Green (-/+, 0~100)
Blue (-/+, 0~100)


Sub-menu Menu Option
Sharpness (-/+, 0~100)
Dynamic Contrast On
Off
Response Time Standard
Advanced
Ultra Fast
Aspect Ratio 4:3
Full Screen
Overscan On
Off
Eco Mode Standard
Optimize
Conserve
ViewMode
Blue Light Filter (-/+, 0~100)

Sub-menu Menu Option
Hot Key Type ECO+DCR
BRI+CON
ASP+ECO
SOU+VOL
Signal Source VGA
DVI
HDMI
Mute On
Off
Volume (-/+, 0~100)

Retrieved from "https://manuals.viewsonic.com/index.php?title=ID1230_Using_the_Pen_Display&oldid=27983"