![Print](INVALID-TITLE:<span style="margin-right:10px;"></span><span class="d-none d-md-inline"><span id="t-print" style="position: relative;bottom:2px; left:1%; z-index:9999; padding:0; margin:0;">[[File:Icon_Print.svg|Print|1px|link=http://localhost/stage/tango/index.php?title=VP3456a_Initial_Setup&printable=yes]]</span></span>
<span class="d-none d-md-inline"><span id="t-print" style="position: relative;bottom:2px; left:1%; z-index:9999; padding:0; margin:0;">[[File:Icon_Print.svg|Print|30px|link=http://localhost/stage/tango/index.php?title=VP3456a_Initial_Setup&printable=yes]]</span></span>
[[Category:Template]]
[[Category:Archive]]){kind=small}
VP3456a Initial Setup: Difference between revisions
From ViewSonic Documentation
| Line 48: | Line 48: | ||
<ol><li> Turn off the device and disconnect all cables.</li> | <ol><li> Turn off the device and disconnect all cables.</li> | ||
<li> Place the device on a flat, stable surface with the screen facing down.</li> | <li> Place the device on a flat, stable surface with the screen facing down.</li> | ||
<li> | <li> Push and hold the quick release tab and carefully lift the stand.</li> | ||
<li> Pull down slightly to disengage the hooks and remove the stand.</li> | <li> Pull down slightly to disengage the hooks and remove the stand.</li> | ||
<div><ul> | <div><ul> | ||
<li style="display: inline-block;">[[File: | <li style="display: inline-block;">[[File:VP3481_Wall_Mount_1.png|400px]]</li> | ||
</div></ul> | </div></ul> | ||
<li> Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li> | <li> Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li> | ||
<li> Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.</li></ol> | <li> Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.</li></ol> | ||
::<div class="res-img">[[File: | ::<div class="res-img">[[File:VP3456a_VESA_Mount.png|350px|VESA mounting points]]</div> | ||
<noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude> | <noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude> | ||
Revision as of 06:11, 24 August 2022
Stand Installation
- Place the monitor on a flat, stable surface with the screen facing down.
- Align and slide the upper hooks of the stand into the stand mounting slots.
- Lift the device into its upright position on a flat, stable surface.
Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
| Maximum Loading | Hole Pattern (W x H) | Interface Pad (W x H x D) | Pad Hole | Screw Specification & Quantity |
|---|---|---|---|---|
| 14 kg | 100 x 100 mm | 115 x 115 x 2.6 mm | Ø 5 mm | M4 x 10 mm - 4 pieces |
- Turn off the device and disconnect all cables.
- Place the device on a flat, stable surface with the screen facing down.
- Push and hold the quick release tab and carefully lift the stand.
- Pull down slightly to disengage the hooks and remove the stand.
- Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
- Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
