Revision as of 02:54, 18 July 2024

MPC310-W31-TU Introduction

Package Contents

NOTE:

The HDMI port only supports video output.
The RJ45 port only supports parameters management.
The USB 2.0 port supports 2.0 output which is only designed for external USB microphone use.

Number	Button	Description
1	Camera Disable	Disable/Enable the video.
2	Call	Answer/Start call/Enter call interface^[1].
3	Control Key	Menu Control/Camera moving direction.
4	Volume Up/Down	Audio volume control.
5	Exit Tracking	After pressing, the camera will exit the tracking mode.
6	Speaker Tracking	Press for voice tracking of the speaker.
7	Preset 1	Long press to set Preset 1; short press to call Preset 1.
8	Preset 2	Long press to set Preset 2; short press to call Preset 2.
9	Standby	Long press to enter Standby mode; short press to return to Normal mode.
10	Hang Up	Hang up the call/Reject to join the meeting^[1].
11	OK (Confirm)	Confirm selection/Camera returns to home position.
12	Microphone Mute	Disable/Enable the microphone.
13	Zoom	Zoom In/Out.
14	Speaker Mute^[2]	Disable/Enable the speaker.
15	Participant Tracking^[3]	The camera will automatically track the participants.
16	Menu	Enter/Exit the OSD menu.
17	Bluetooth	Disable/Enable Bluetooth. Long press to switch Host and Client mode after Bluetooth is enabled.

↑ ^1.0 ^1.1 For "Skype for Business" and "Microsoft Teams" only.
↑ Long press to disable the audio function completely. External devices will not detect the VB-CAM-201 as a speaker or microphone. If the function is disabled, a mute icon will be on screen.
↑ Long press to enter “Live Mosaic View” mode.

Remove the cover on the rear of the remote control.
Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post.
Replace the cover by aligning it with the slot on the remote control and snapping the latch shut.

NOTE:

Avoid leaving the remote control or batteries in excessive heat or humidity.
Always dispose of old batteries in an environmentally friendly way. Contact your local government for more information on how to dispose of batteries safely.
Remove the batteries if the remote control will not be in use for an extended period of time.
It is recommended that you do not mix battery types.

@@ Line 22: / Line 22: @@
 MPC310-W31-TU_VESA_Bracket_PC_Side.svg |VESA Mounting Bracket<br>(PC side)
 MPC310-W31-TU_VESA_Bracket_Other_Side.svg |VESA Mounting Bracket<br>(Wall/Table/Trolley side)
+MPC310-W31-TU Anchor Screw.svg | 4 x Anchor Screws<br>T4 x 20 mm
+MPC310-W31-TU Anchor.svg | 4 x Anchors, Ø6.0 x 25 mm<br>(for Wall/Table)
+MPC310-W31-TU Bracket Screw.svg | 4 x Bracket Scrwes<br>M3 x 6mm
+MPC310-W31-TU E-Type Circlip.svg | 4 x E-type Circlips,  Ø8
+MPC310-W31-TU Hex Nut.svg | 4 x Hex Nuts, M4 x 4 mm
+MPC310-W31-TU M4 Screw.svg | 4 x M4 Screws
 </gallery>