• Print Print

LD163-181 Installation: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 31: Line 31:
<li>Install the first Upper ''Wall Mount Bracket'' with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).</li>
<li>Install the first Upper ''Wall Mount Bracket'' with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).</li>


<li>Repeat '''Step 2''', ensuring the second Upper ''Wall Mount Bracket'' is level with the first upper bracket.</li>
<li>Repeat '''Step 2''', ensuring the second Upper ''Wall Mount Bracket'' is level with the first upper bracket.</li><br />
<div class="res-img">[[File:LD_Wall_Mounting_After_Upper_Brackets.svg|400px]]</div>
 
<li>Install the Lower ''Wall Mount Brackets'' in the same manner as the Upper ''Wall Mount Brackets''. The distance between the Upper and Lower ''Wall Mount Brackets'' is 77-3/8" (1965 mm).</li>
<div class="res-img">[[File:LD_Wall_Mounting_After_Upper_Brackets.svg|400px]]</div><br />
 
<li>Install the Lower ''Wall Mount Brackets'' in the same manner as the Upper ''Wall Mount Brackets''. The distance between the Upper and Lower ''Wall Mount Brackets'' is 77-3/8" (1965 mm).</li><br />
 
<div class="res-img">[[File:LD_Wall_Mounting_Spacing.svg|400px]]</div><br />


{{Note-yellow|'''NOTE:''' You can also install the Upper ''Wall Mount Brackets'', hang the screen, and then install the Lower ''Wall Mount Brackets'' for a more precise fit.}}
{{Note-yellow|'''NOTE:''' You can also install the Upper ''Wall Mount Brackets'', hang the screen, and then install the Lower ''Wall Mount Brackets'' for a more precise fit.}}
Line 57: Line 61:


==Installing System Control Box Covers==
==Installing System Control Box Covers==


=Floor Stand Installation=
=Floor Stand Installation=


[[Category:LD163-181]]
[[Category:LD163-181]]

Revision as of 07:57, 10 August 2020

LD163-181 Installation
Introduction
Remote Control
Wall Installation
Floor Stand Installation
Connecting Devices
Using the Display
On-Screen Display Menu
Pre-installed Applications
RS-232 Protocol
Specifications
[[{{{11}}}|Regulatory and Service Information]]
Safety Precautions
Troubleshooting
Maintenance

Before Installation

  1. Maintain an adequate air gap between the back of the display and any wall for proper ventilation.
  2. Ensure there is no direct airflow from air conditioning or heating vents blowing on the display.
  3. Avoid installing the display in places with high humidity.
  4. Due to high power usage, always use power cords specifically designed for this product.

Wall Mounting

Installing the Upper and Lower Mounting Brackets

  1. Ensure the wall area and size is an appropriate installation site.
  2. Using the Wall Mount Bracket (pictured above) as a guide, mark each of the eight (8) holes and pre-drill each.
  3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).
  4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first upper bracket.


  5. Install the Lower Wall Mount Brackets in the same manner as the Upper Wall Mount Brackets. The distance between the Upper and Lower Wall Mount Brackets is 77-3/8" (1965 mm).


    6. NOTE: You can also install the Upper Wall Mount Brackets, hang the screen, and then install the Lower Wall Mount Brackets for a more precise fit.
  6. After installing both Upper and Lower Wall Mount Brackets, the installation wall should look like:

Installing the Middle Cabinets

Installing the Left and Right Cabinet

Connecting and Securing the Cabinets

Connecting the System Control Box

Installing the LED Modules

Installing System Control Box Covers

Floor Stand Installation

Retrieved from "https://manuals.viewsonic.com/index.php?title=LD163-181_Installation&oldid=3307"