LD163-181 Installation: Difference between revisions
From ViewSonic Documentation
| Line 24: | Line 24: | ||
<ol> | <ol> | ||
<div class="res-img">[[File:LD_Wall_Mounting_Bracket.svg|400px]]</div> | |||
<li>Ensure the wall area and size is an appropriate installation site.</li> | <li>Ensure the wall area and size is an appropriate installation site.</li> | ||
Revision as of 07:50, 10 August 2020
Before Installation
- Maintain an adequate air gap between the back of the display and any wall for proper ventilation.
- Ensure there is no direct airflow from air conditioning or heating vents blowing on the display.
- Avoid installing the display in places with high humidity.
- Due to high power usage, always use power cords specifically designed for this product.
Wall Mounting
Installing the Upper and Lower Mounting Brackets
- Ensure the wall area and size is an appropriate installation site.
- Using the Wall Mount Bracket (pictured above) as a guide, mark each of the eight (8) holes and pre-drill each.
- Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).
- Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first upper bracket.
- Install the Lower Wall Mount Brackets in the same manner as the Upper Wall Mount Brackets. The distance between the Upper and Lower Wall Mount Brackets is 77-3/8" (1965 mm).
- After installing both Upper and Lower Wall Mount Brackets, the installation wall should look like:
NOTE: You can also install the Upper Wall Mount Brackets, hang the screen, and then install the Lower Wall Mount Brackets for a more precise fit.