• Print Print

GD1330 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> {{Sticky_Menu_Pen_Display_MA14 |1=GD1330_Introduction |2=GD1330_Making_Connections |3=GD1330_Setting_the_Display_Area |4=GD1330_Pen_Input_Area_Mapping |5=GD1330_Device_Features |6=GD1330_Specifications |7=GD1330_Regulatory_and_Service_Information }} </noinclude> =Installing Drivers and Software= '''System Requirements:'''<br /> Operating system: Windows XP/7/8/10 (32/64 bit)<br /> PC I/O: USB 2.0/above Before connecting and using the pen display, it is nece..."
 
Line 10: Line 10:
}}
}}
</noinclude>
</noinclude>
=Installing Drivers and Software=
=Connecting to the Pen Display=
'''System Requirements:'''<br />
The pen display can be connected to a computer by either HDMI and USB Type C, or only USB Type C.
Operating system: Windows XP/7/8/10 (32/64 bit)<br />
PC I/O: USB 2.0/above


Before connecting and using the pen display, it is necessary to install the below software. The software can be downloaded at: <br/>
==HDMI and USB Type C==
https://www.viewsonicglobal.com/q/MA1014H<br />
#Ensure the power of the computer and pen display are off before connecting them.
https://www.viewsonicglobal.com/q/MA1214H<br />
#Connect one end of the HDMI cable to the HDMI port of your computer. Then connect the Mini HDMI end of the cable to the Mini HDMI port of the pen display.
<div class="res-img">[[File:PD1013_PD1013T_Driver_Software.png|200px]]</div>
#Connect the USB Type A end of the USB cable to your computer. Then connect the USB Type C end to the pen display.
 
<div class="res-img">[[File:GD1330_Connect_HDMI_USB.png|300px]]</div>
==DisplayLink Driver==
:'''NOTE:''' If connected to a desktop computer, and a monitor was already connected to the computer itself, then the tablet and monitor must be connected to the same graphics card of the desktop computer.
Open the '''DisplayLink''' installation file and install the driver.
<div class="res-img">[[File:DisplayLink_Update.png]]</div>
:<small>'''NOTE:''' DisplayLink Driver can be installed through Windows Update when connected to the Internet.</small>
 
==Pen Display Driver==
Pen Display Manager can be used to map the active area and adjust the feel of the pen.
# Open the '''ViewSign Console''' installation file and install the driver ('''Pen Display Manager''').
# Restart the computer after the installation completes.
::<div class="res-img">[[File:Pen_Display_Driver.png|400px]]</div>
:::<small>'''NOTE:''' For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software</small>


=Connecting Device=
=Connecting Device=

Revision as of 09:51, 18 April 2023

GD1330 Making Connections
Introduction
Making Connections
Setting the Display Area
Pen Input Area Mapping
Device Features
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Connecting to the Pen Display

The pen display can be connected to a computer by either HDMI and USB Type C, or only USB Type C.

HDMI and USB Type C

  1. Ensure the power of the computer and pen display are off before connecting them.
  2. Connect one end of the HDMI cable to the HDMI port of your computer. Then connect the Mini HDMI end of the cable to the Mini HDMI port of the pen display.
  3. Connect the USB Type A end of the USB cable to your computer. Then connect the USB Type C end to the pen display.
NOTE: If connected to a desktop computer, and a monitor was already connected to the computer itself, then the tablet and monitor must be connected to the same graphics card of the desktop computer.

Connecting Device

  1. Connect the Main USB A cable to the computer.
  2. The Secondary USB A cable can be connected to an AC outlet using the suppliedpower adapter.
NOTE:
  • Power through the secondary USB cable from the AC/DC Adapter willensure a sufficient power supply to avoid screen flicker in case the powerfrom the computer is not stable.
  • Customized units may have an additional USB cable for the DocumentCamera. Please also connect this USB cable to the computer.

Retrieved from "https://manuals.viewsonic.com/index.php?title=GD1330_Making_Connections&oldid=27109"