• Print Print

VP3456a Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> {{Sticky_Menu_Monitor_3.0_SUF |1=VP3456a_Introduction |2=VP3456a_Initial_Setup |3=VP3456a_Connecting_Power_and_Devices |4=VP3456a_Adjusting_the_Viewing_Angle |5=VP..."
 
Line 17: Line 17:
=Stand Installation=
=Stand Installation=
# Place the monitor on a flat, stable surface with the screen facing down.
# Place the monitor on a flat, stable surface with the screen facing down.
# Align and connect the two (2) points on the monitor stand’s base with the monitor stand’s neck.
# Use the captured screw in the monitor stand’s base and secure it to the monitor stand’s neck.
# Align and slide the upper hooks of the stand into the stand mounting slots.
# Align and slide the upper hooks of the stand into the stand mounting slots.
# Lift the device into its upright position on a flat, stable surface.
# Lift the device into its upright position on a flat, stable surface.


<div><ul>
<div><ul>
<li style="display: inline-block;"> [[File:VP2456_Install_1.png|330px|Align the points]]</li>
<li style="display: inline-block;"> [[File:VP3481_Install_1.png|330px|Align the points]]</li>
<li style="display: inline-block;"> [[File:VP2456_Install_2.png|280px|Secure the Base and Neck]]</li>
<li style="display: inline-block;"> [[File:VP3481_Install_2.png|280px|Secure the Base and Neck]]</li>
<li style="display: inline-block;"> [[File:VP2456_Front_View.png|230px|Lift into an upright position]]</li>
</ul></div>
</ul></div>
<br>
<br />
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}


Revision as of 06:09, 24 August 2022

VP3456a Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Advanced Features and Settings
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Stand Installation

  1. Place the monitor on a flat, stable surface with the screen facing down.
  2. Align and slide the upper hooks of the stand into the stand mounting slots.
  3. Lift the device into its upright position on a flat, stable surface.
  • Align the points
  • Secure the Base and Neck


Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.

For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum Loading Hole Pattern (W x H) Interface Pad (W x H x D) Pad Hole Screw Specification & Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Use the captured screw in the monitor stand’s base and remove it from the monitor stand’s neck.
  4. Press and hold the quick release tab and carefully lift the stand.
  5. Pull down slightly to disengage the hooks and remove the stand.
  6. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
  7. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
VESA mounting points

Using the Security Slot

Retrieved from "https://manuals.viewsonic.com/index.php?title=VP3456a_Initial_Setup&oldid=21829"