IFP62 Embedded Player

Embedded Player Settings

When the ViewBoard is in the Embedded Player input source, press MENU on the remote control or tap the setting icon next to the input source in the On-Screen Display (OSD) Menu’s Input Settings to enter the Settings menu.

Wireless & Network

Wi-Fi

Setup and manage wireless access points.

• 
• 
• 

• Tap the toggle button to turn Wi-Fi On or Off.
• Once On, you can: Add a Network, view Saved Networks, Refresh the network list, or view Advanced settings.
• In Advanced settings, you can toggle Network notifications On or Off and view Network card info.

Ethernet

Set the local network and proxy.

• 
• 

• Tap the drop down menu to connect/disconnect the Ethernet.
• You can adjust Local network and Proxy settings as well.

Display

Adjust the Wallpaper, Theme, Protection, and HDMI Out settings.

HDMI Out

Adjust the HDMI Out Resolution setting and disable/enable the display speaker when connected via HDMI Out.

Item	Description
On	The ViewBoard speaker will be muted and send 100% volume via HDMI Out.
Off	The volume percentage via HDMI Out will be the same as the ViewBoard speaker.

Input Source

Adjust the input source names and settings, as well as the side tool bar settings.

Rename Input Source

Set labels for each input source that will be easily recognized when displayed.

Source

Toggle Wake up by active source, Signal auto search, and HDMI CEC and select Input port auto switch.

Item	Description
Wake up by Active Source	The screen will turn on automatically after plugging in an HDMI cable when the screen is off.
Signal Auto Search	When enabled, if the current source does not have a signal, the ViewBoard will automatically search for an input source.
Input Port Auto Switch	The original signal will automatically switch to a new cable after it’s plugged in.
Energy Saving	Set a time period to power off if no signal is detected.
HDMI CEC	Enable/disable HDMI CEC functions.

App

The user can view App information and force stop, uninstall, clear data, clear cache, and clear defaults.

NOTE:

• Pre-loaded apps cannot be uninstalled.
• Not all apps support Clear Defaults.

App

View any running or installed applications. Tap on them for more detailed information and options.

• 
• 
• 
• 

• By tapping on a running application, you can see more information, stop, or report the application.
• Selecting All or Download will list all installed applications.
• Tapping on any application will display further information and options.

System

View and adjust Storage, Security, System Update, and About device settings.

Storage

Users can check the storage status of their ViewBoard.

Clone to USB

Copy settings to an external USB drive.

Display ID

Assign a number to remote control the display by RS-232/LAN.

• To assign or change the Display ID, tap Change and input a number.

NOTE: The Display ID is for RS-232 users, and the range is 01~99.

Security

Review Certificate, Trusted Credential storage, and Unknown sources install settings.

• 
• 
• 
• 
• 
• 

• Tap on Install certificate from storage to add additional certificates.
• Selecting Clear Credentials will remove all manually installed credentials.

NOTE: Pre-loaded credentials cannot be cleared.

• Under Trusted Credentials view and edit all trusted and installed CA certificates.
• Tapping on a credential will provide more detailed information.
• Allow the installation of applications from unknown sources by selecting the box under Unknown source security.

NOTE: Apps from unknown sources may not be compatible or work properly.

Privacy and Copyright Protection
Agree/disagree to allow the ViewBoard to collect user behavior data.

System Update

The ViewBoard automatically searches for software updates whenever connected to the Internet (OTA). With just one click, users can update their version of ViewBoard software.

Item	Description
Auto Update	When the display is off, the system will automatically check for a new version. If a new version is found, the system will automatically update. After the update is complete, the system will turn off.
Schedule	Set the update time.
Manual Update	Update the software manually.
Check Update	Check for any available updates.
Local Update	Update the system from an external USB device.

About Device

Display Embedded Player information, Legal information, and Asset Tagging.

• 
• 
• 

• By selecting Edit, the asset information can be adjusted.
• Tap on Legal information to check open source licenses.