• Print Print

PD0521 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> __NOTOC__ {{Sticky_Menu_Pen_Display_No_Adj |1=PD0521_Introduction |2=PD0521_Making_Connections |3=PD0521_Using_the_Display |4=PD0521_Setting_the_Display_Area |5=PD..."
 
Line 11: Line 11:
</noinclude>
</noinclude>
=Installing Drivers and Software=
=Installing Drivers and Software=
'''System Requirements:'''<br />
===System Requirements===
Operating system: Windows XP/7/8/10 (32/64 bit)<br />
Operating system: Windows XP/7/8/10 (32/64 bit)<br />
PC I/O: USB 2.0/above
PC I/O: USB 2.0/above


Before connecting and using the pen display, it is necessary to install the below
ViewSign Standard software is the recommended software to use with PD0521 for PDF signing.
drivers and software. The drivers and software can be downloaded at:<br />
http://www.viewsonicglobal.com/q/PD0511
<div class="res-img">[[File:PD1013_PD1013T_Driver_Software.png|200px]]</div>


==DisplayLink Driver==
<div class="res-img">[[File:PD0521_ViewSign.png|500px]]</div>
Open the DisplayLink installation file and install the driver.
<div class="res-img">[[File:DisplayLink_1.png|500px]]</div>
<div class="res-img">[[File:DisplayLink_2.png|500px]]</div>
:<small>'''NOTE:''' DisplayLink Driver can be installed through Windows Update.</small>


==Pen Display Driver==
To learn more about the ViewSign Standard software, please see: [[ViewSign_Software]].
Pen Display Manager can be used to map the active area and adjust the feel of the pen.
 
# Open the ViewSign Console installation file and install the driver.
:'''NOTE:''' If you want to use the full version of the ViewSign Standard Software, please contact customer service at www.viewsonic.com.
# After the installation completes, you will need to restart the computer.
::<div class="res-img">[[File:Pen_Display_Driver.png|400px]]</div>
:::<small>'''NOTE:''' For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software</small>


=Connecting the Signature Pad=
=Connecting the Signature Pad=

Revision as of 10:13, 11 August 2023

PD0521 Making Connections
Introduction
Making Connections
Using the Display
Setting the Display Area
Pen Input Area Mapping
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Installing Drivers and Software

System Requirements

Operating system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above

ViewSign Standard software is the recommended software to use with PD0521 for PDF signing.

To learn more about the ViewSign Standard software, please see: ViewSign_Software.

NOTE: If you want to use the full version of the ViewSign Standard Software, please contact customer service at www.viewsonic.com.

Connecting the Signature Pad

  1. Turn the device over so the bottom side is facing up.
  2. Connect the Micro USB end of the USB cable to the Micro USB Port on the device.
  3. Connect the other end of the USB cable to a computer.
Retrieved from "https://manuals.viewsonic.com/index.php?title=PD0521_Making_Connections&oldid=29898"