• Print Print

M2e Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> {{Sticky_Menu_Projector |1=M2e_Introduction |2=M2e_Remote_Control |3=M2e_Initial_Setup |4=M2e_Connecting_Power_and_Devices |5=M2e_Using_the_Projector |6=M2e_Operat..."
 
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 12: Line 12:
|10=M2e_Regulatory_and_Service_Information
|10=M2e_Regulatory_and_Service_Information
}}
}}
{{Top}}
</noinclude>
</noinclude>
__NOTOC__=Choosing a Location - Projector Orientation=
Personal preference and room layout will decide the installation location. Consider the following:
* Size and position of your screen.
* Location of a suitable power outlet.
* Location and distance between the projector and other equipment.
<gallery mode="traditional">
X10_Front_Table.png| Front Table
X10_Front_Ceiling.png| Front Ceiling
X10_Rear_Table.png| Rear Table
X10_Rear_Ceiling.png| Rear Ceiling
</gallery>
{| class="wikitable" width=45% style="text-align: center";
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Location
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Description
|-
| style="font-weight:bold;" | Front Table
| The projector is placed near the floor in front of the screen.
|-
| style="font-weight:bold;" | Front Ceiling
| The projector is suspended upside-down from the ceiling in front of the screen.
|-
| style="font-weight:bold;" | Rear Table<ref name="id">A rear projection screen is required.</ref>
| The projector is placed near the floor behind the screen.
|-
| style="font-weight:bold;" | Rear Ceiling<ref name="id" />
| The projector is suspended upside-down from the ceiling behind the screen.
|}
<references />


=Projection Dimensions=
[[File:Projection_Dimensions.png|700px|]]


: <small>'''NOTE:''' (e) = Screen | (f) = Center of Lens</small>
===16:9 Image on a 16:9 Screen===


{| class="wikitable" style="text-align: center" width="45%"
|-
! colspan="2" style="font-weight:bold; background-color:#c41230; color:#ffffff;"| (a) Screen Size
! colspan="2" style="font-weight:bold; background-color:#c41230; color:#ffffff;"| (b) Projection Distance
! colspan="2" style="font-weight:bold; background-color:#c41230; color:#ffffff;"| (c) Image Height
! colspan="2" style="font-weight:bold; background-color:#c41230; color:#ffffff;"| Image Width
|-
| in.
| cm
| in.
| m
| in.
| cm
| in.
| cm
|-
| 30
| 76.2
| 31.64
| 0.80
| 14.71
| 37.36
| 26.15
| 66.4
|-
| 40
| 101.6
| 42.18
| 1.07
| 19.61
| 49.81
| 34.86
| 88.6
|-
| 50
| 127
| 52.73
| 1.34
| 24.51
| 62.26
| 43.58
| 110.7
|-
| 60
| 152.4
| 63.28
| 1.61
| 29.42
| 74.72
| 52.29
| 132.8
|-
| 70
| 177.8
| 73.82
| 1.88
| 34.32
| 87.17
| 61.01
| 155.0
|-
| 80
| 203.2
| 84.37
| 2.14
| 39.22
| 99.62
| 69.73
| 177.1
|-
| 90
| 228.6
| 94.91
| 2.41
| 44.12
| 112.07
| 78.44
| 199.2
|-
| 100
| 254
| 105.46
| 2.68
| 49.03
| 124.53
| 87.16
| 221.4
|}
{{Note-yellow| There is a 3% tolerance among these numbers due to optical component variations. It is recommended to physically test the projection size and distance before permanently installing the projector.}}


=Mounting the Projector=
:'''NOTE:''' If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.


 
<ol><li> To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.</li>
 
<li>Ensure the screws used to attach the mount to the projector meet the following specifications:</li>
 
::* Screw type: M4 x 8
 
::* Maximum Screw Length: 8 mm
 
<li>To access the ceiling mount points, remove the three (3) foot pads on the bottom of the projector.</li></ol>
[[File:M2e_Mount.png|400px]]
{{Note-yellow|'''CAUTION'''
::* Avoid installing the projector near a heat source.
::* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.}}


{{#seo:
{{#seo:

Latest revision as of 03:11, 21 December 2020

M2e Initial Setup
Introduction
Remote Control
Initial Setup
Connecting Power and Devices
Using the Projector
Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Specifications
Regulatory and Service Information
Safety Precautions
Ceiling Mounting Safety
Glossary
Troubleshooting
Maintenance

Choosing a Location - Projector Orientation

Personal preference and room layout will decide the installation location. Consider the following:

  • Size and position of your screen.
  • Location of a suitable power outlet.
  • Location and distance between the projector and other equipment.
  • Front Table
    Front Table
  • Front Ceiling
    Front Ceiling
  • Rear Table
    Rear Table
  • Rear Ceiling
    Rear Ceiling
Location Description
Front Table The projector is placed near the floor in front of the screen.
Front Ceiling The projector is suspended upside-down from the ceiling in front of the screen.
Rear Table[1] The projector is placed near the floor behind the screen.
Rear Ceiling[1] The projector is suspended upside-down from the ceiling behind the screen.
  1. ↑ 1.0 1.1 A rear projection screen is required.

Projection Dimensions

NOTE: (e) = Screen | (f) = Center of Lens

16:9 Image on a 16:9 Screen

(a) Screen Size (b) Projection Distance (c) Image Height Image Width
in. cm in. m in. cm in. cm
30 76.2 31.64 0.80 14.71 37.36 26.15 66.4
40 101.6 42.18 1.07 19.61 49.81 34.86 88.6
50 127 52.73 1.34 24.51 62.26 43.58 110.7
60 152.4 63.28 1.61 29.42 74.72 52.29 132.8
70 177.8 73.82 1.88 34.32 87.17 61.01 155.0
80 203.2 84.37 2.14 39.22 99.62 69.73 177.1
90 228.6 94.91 2.41 44.12 112.07 78.44 199.2
100 254 105.46 2.68 49.03 124.53 87.16 221.4
There is a 3% tolerance among these numbers due to optical component variations. It is recommended to physically test the projection size and distance before permanently installing the projector.

Mounting the Projector

NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Ensure the screws used to attach the mount to the projector meet the following specifications:
    • Screw type: M4 x 8
    • Maximum Screw Length: 8 mm
  3. To access the ceiling mount points, remove the three (3) foot pads on the bottom of the projector.

CAUTION
  • Avoid installing the projector near a heat source.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
Retrieved from "https://manuals.viewsonic.com/index.php?title=M2e_Initial_Setup&oldid=8109"