• Print Print

VG3456a Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> {{Sticky_Menu_Monitor_3.0_No_Adv |1=VG3456a_Introduction |2=VG3456a_Initial_Setup |3=VG3456a_Connecting_Power_and_Devices |4=VG3456a_Adjusting_the_Viewing_Angle |5=VG3456a_Quick_Menu |6=VG3456a_Hot_Keys |7=VG3456a_On-Screen_Display_Menu |8=VG3456a_On-Screen_Display_Menu_Tree |9=VG3456a_On-Screen_Display_Menu_Options |10=VG3456a_Specifications |11=VG3456a_Regulatory_and_Service_Information }} </noinclude> =Installing the Stand= <ol><li>Place the box on a flat..."
 
 
(2 intermediate revisions by the same user not shown)
Line 27: Line 27:


=Removing the Stand and Mounting the Display=
=Removing the Stand and Mounting the Display=
Refer to the table below for the standard dimensions for mounting kits.
:{{Note-yellow|For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}
:{{Note-yellow|For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}
:<div class="res-img">[[File:VG3419C_VESA.png|400px|VESA Dimensions]]</div>


Refer to the table below for the standard dimensions for mounting kits.
{| class="wikitable" style="text-align:center; background-color:#ffffff; width:auto;"
{| class="wikitable" style="text-align:center; background-color:#ffffff; width:auto;"
|-
|-
Line 48: Line 47:
|}
|}
:'''NOTE:''' Mounting kits are sold separately.
:'''NOTE:''' Mounting kits are sold separately.
<div><ul>
<div class="res-img">[[File:VG3419C_Stand_Remove.png|400px|Removing the Stand]]</li>
</ul></div>
<ol><li>Turn off the device and disconnect all cables.</li>
<ol><li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Remove the monitor stand.</li>
<li>Push and hold the quick release tab and carefully lift the stand.</li>
<div class="res-img">[[File:VG3456a_Stand_Remove_1.png|400px|Removing the Stand]]</div>
<li>Pull down slightly to disengage the hooks and remove the stand.</li>
<div class="res-img">[[File:VG3456a_Stand_Remove_2.png|400px|Removing the Stand]]</div>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
<div class="res-img">[[File:VG3456a_Stand_Remove_3.png|400px|Removing the Stand]]</div>
<li>Follow the instructions that come with the mounting kit to mount the monitor.</li></ol>
<li>Follow the instructions that come with the mounting kit to mount the monitor.</li></ol>


{{Security_Slot}}
=Using the Security Slot=
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.
 
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.


Below is an example of setting up a security slot locking device on a table.
<div class="res-img">[[File:VG3456a_Security_Slot.png|400px|Using the Security Slot]]</div>




Latest revision as of 07:04, 25 October 2023

VG3456a Initial Setup
Introduction
Initial Setup
Connecting to Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Installing the Stand

  1. Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray.
  2. Remove the monitor stand’s base and neck. Align and connect the three (3) points on the monitor stand’s base with the monitor stand’s neck.
  3. Use the captured screw in the monitor stand’s base and secure it to the monitor stand’s neck.
    4. Installing the Stand
  4. Align and slide the upper hooks of the monitor stand into the stand mounting slots as shown in the illustration below:
    5. Installing the Stand
    NOTE: Ensure the stand is secure and the quick release tab positively clicks into place.
  5. Using the stand’s handle, lift the device out of the box and into its upright position on a flat, stable surface.
    6. Installing the Stand
    NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Removing the Stand and Mounting the Display

Refer to the table below for the standard dimensions for mounting kits.

For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum Loading Hole Pattern (W x H) Interface Pad (W x H x D) Pad Hole Screw Specification Screw Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm 4 screws
NOTE: Mounting kits are sold separately.
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Push and hold the quick release tab and carefully lift the stand.
    4. Removing the Stand
  4. Pull down slightly to disengage the hooks and remove the stand.
    5. Removing the Stand
  5. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
    6. Removing the Stand
  6. Follow the instructions that come with the mounting kit to mount the monitor.

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

Using the Security Slot
Retrieved from "https://manuals.viewsonic.com/index.php?title=VG3456a_Initial_Setup&oldid=31231"