XG271QG Specifications

    From ViewSonic User Guide Database

    Technical Specifications

    XG271QG.png
    Model No. P/N
    VS18520 XG271QG
    Item Category Specifications
    LCD Type TFT, Active Matrix 2560 x 1440 LCD,

    0.2331 mm x 0.2331 mm pixel pitch

    Display Size 68.6 cm, 27"
    Color Filter RGB vertical stripe
    Glass Surface Anti-Glare type, Hard Coating (3H)
    Input Signal Video Sync TMDS digital (100 Ω)

    HDMI: fh:30-230 kHz, fv:48-144 Hz

    DisplayPort: fh:30-250 kHz, fv:48-240 Hz

    Compatibility PC up to 2560 x 1440
    Macintosh up to 2560 x 1440
    Recommended 2560 x 1440 @ 240Hz
    Resolution[1] Supported
    • 2560 x 1440 @ 100, 120, 144, 165, 240Hz
    • 1920 x 1080 @ 100, 120, 144Hz
    • 1680 x 1050 @ 60Hz
    • 1440 x 900 @ 60, 75Hz
    • 1280 x 1024 @ 60, 75Hz
    • 1024 x 768 @ 50, 60, 70, 72, 75Hz
    • 800 x 600 @ 56, 60, 72, 75Hz
    • 720 x 400 @ 70Hz
    • 640 x 480 @ 50, 60, 67, 72, 75Hz
    Power Adapter[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
    Display Area Full Scan (H x V) 596.736 x 335.664 (23.49” x 13.22”)
    Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
    Humidity 20% to 90% (non-condensing)
    Altitude 10,000 feet (3.048 km)
    Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
    Humidity 5% to 90% (non-condensing)
    Altitude 40, 000 feet (12.1 km)
    Dimensions Physical

    (W x H x D)

    614.2 x 458.7~571.6 x 265.2 mm

    (24.18” x 18.06~22.50” x 10.44”)

    Wall Mount Dimensions 100 x 100 mm
    Weight Physical 11.95 kg (26.35 lbs)
    Power Saving Modes On[3] 50W (Typical)[4]
    Off < 0.3W (Max)
    1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
    2. Please use the power adapter from ViewSonic® or an authorized source only.
    3. The test condition follows EEI standards.
    4. Without USB and audio.