VPCF5 Using the Device

    From ViewSonic User Guide Database
    VPCF5 Using the Device
    Introduction
    Initial Setup
    Making Connections
    Using the Device
    Appendix
    Regulatory and Service Information

    Selecting an Input Source

    IFP Series

    VPC-A31-O1 Input IFP.png

    To select an input source:

    1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
    2. Press ▼/▲/◄/► on the remote control to select the PC source.
    3. Press OK/ENTER on the remote control, or touch the input source directly.
    4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.
      5. NOTE: The above image is for reference only and is subject to change without notice.

    CDE Series

    VPC-A31-O1 Input CDE.png

    To select an input source:

    1. Press INPUT on the remote control.
    2. Press ▼/▲ on the remote control to select the PC source.
    3. Press OK/ENTER on the remote control.
    4. Press EPG/BACK on the remote control to exit.
      5. NOTE: The above image is for reference only and is subject to change without notice.
    Retrieved from "https://manuals.viewsonic.com/index.php?title=VPCF5_Using_the_Device&oldid=37220"