VG2757V-2K Quick Menu

Turning the Monitor On/Off

1. Plug the power cord into a power outlet.
2. Press the Power button to turn on the monitor.
3. To turn the monitor off, press the Power button again.
Note: The monitor will still consume some power as long as the power cord is connected to the power outlet. If the monitor is not being used for a long period of time, please disconnect the power plug from the power outlet.

Using the Webcam

If Connected by DisplayPort or HDMI

To activate the webcam, ensure the monitor is also connected to your computer via the USB Upstream port.

If Connected by USB Type C

The webcam will already be activated and ready for use.

Uncovering and Covering the Webcam (Privacy Mode)

Uncover	Cover
To pop-up and uncover the webcam, press the top of the webcam.	To cover the webcam, press the top of the webcam.

Using the Monitor Camera for Windows Hello

You can use Windows Hello facial recognition to sign-in with the camera on the monitor.
Please refer to Windows’ official website for Windows Hello settings: Learn about Windows Hello and set it up.

Tilting the Webcam

When the webcam is uncovered, tilt it forwards or backwards to adjust the viewing angle (-5° to 5°).

Using the Control Panel Keys

Use the control panel keys to adjust the ViewMode and LED Fill Light, mute the Speaker and Microphone, and navigate the On-Screen Display (OSD) Menu.

ViewMode

Press the 1 key to select one of the preset color settings.

LED Fill Light

Press the 2 key to turn on the LED lights.

Speaker Mute

Press the 3 key to mute/unmute the Speaker.

Microphone Mute

Press the 4 key to mute/unmute the Microphone.

Main Settings

Press the 5 key to decrease/increase the Volume level, adjust the LED Fill Light, and enter the On-Screen Display (OSD) Menu.