VA2232-h Specifications

From ViewSonic User Guide Database
Jump to navigation Jump to search

Technical Specifications

VA2232-h.png
Model No. P/N
VS17825 VA2232-h
Item Category Specifications
LCD Type IPS, TFT LCD,

Active Matrix 2560 x 1440 0.248 mm x 0.248 mm pixel pitch

Display Size 54.6 cm, 22" (21.5" viewable)
Color Filter RGB vertical stripe
Glass Surface Anti-Glare type, 3H hard coating
Input Signal Video Sync TMDS digital (100 Ω)
HDMI: fh:24-83 Khz, fv:50-75 Hz
Analog: fh:24-83 Khz, fv:50-75 Hz
Compatibility PC up to 1920 x 1080
Macintosh up to 1920 x 1080
Recommended 1920 x 1080 @ 60Hz
Resolution[1] Supported
  • 1920 x 1080 @ 75Hz, 60, 50Hz
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1440 x 576 @ 50Hz
  • 1400 x 1050 @ 60, 75Hz
  • 1366 x 768 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 50, 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 60, 75Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 60Hz
  • 1152 x 900 @ 66Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 60, 75Hz
  • 1024 x 768 @ 40, 48, 56, 58, 60Hz
  • 1024 x 600 @ 60Hz
  • 848 x 480 @ 60Hz
  • 832 x 624 @ 75Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 66, 72, 75Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power Adapter[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan

(H x V)

476.06 x 267.79 mm

(18.74” x 10.54”)

Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 20% to 90% (non-condensing)
Altitude 16,404 feet (4.9 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40, 000 feet (12.1 km)
Dimensions Physical

(W x H x D)

489.9 x 377.1 x 185.2 mm

(19.3” x 14.8” x 7.3”)

Wall Mount Dimensions 75 x 75 mm
Weight Physical 2.4 kg (5.3 lbs)
Power Saving Modes On[3] 20W (Typical)
Off < 0.5W (Max)
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. Please use the power adapter from ViewSonic® or an authorized source only.
  3. The test condition follows EEI standards.