TD1656-2K Specifications

From ViewSonic Documentation
Jump to: navigation, search

Technical Specifications

Item Category Specifications
Model P/N. TD1656-2K
No. VS19906
LCD Type TFT Active Matrix 2560 x 1600 LCD; 0.0449 (H)mm x 0.1346 (V)mm pixel pitch
Display Size 40.6 cm
16" (viewable)
Color Filter RGB Vertical Stripe
Glass Surface Anti-Glare type, Hard Coating (3H)
Input Signal Video Sync TMDS Digital (100 Ω)
Type C: fh:15~100 kHz, fv:50-75 Hz
Compatibility PC up to 2560 x 1600
Macintosh up to 2560 x 1600
Recommended 2560 x 1600 @ 60 Hz
Resolution[1] Supported
  • 2560 x 1600 @ 60 Hz
  • 2560 x 1080 @ 60 Hz
  • 2048 x 1152 @ 60 Hz
  • 1920 x 1200 @ 60 Hz
  • 1920 x 1080 @ 50, 60 Hz
  • 1680 x 1050 @ 60 Hz
  • 1600 x 1200 @ 60 Hz
  • 1600 x 900 @ 60 Hz
  • 1440 x 900 @ 60, 75 Hz
  • 1400 x 1050 @ 60 Hz
  • 1366 x 768 @ 60 Hz
  • 1360 x 768 @ 60 Hz
  • 1280 x 1024 @ 50, 60, 75 Hz
  • 1280 x 960 @ 50, 60, 75 Hz
  • 1280 x 800 @ 60, 75 Hz
  • 1280 x 768 @ 50, 60, 75 Hz
  • 1280 x 720 @ 50, 60 Hz
  • 1152 x 870 @ 75 Hz
  • 1152 x 864 @ 60, 75 Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75 Hz
  • 800 x 600 @ 56, 60, 72, 75 Hz
  • 720 x 576 @ 50 Hz
  • 720 x 480 @ 60 Hz
  • 720 x 400 @ 70 Hz
  • 640 x 480 @ 50, 60, 67, 72, 75 Hz
  • 640 x 400 @ 60, 70 Hz
  • 640 x 350 @ 70 Hz
Power[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
USB-C PD Adapter[3] TD1656-2K PD output complies with: PD 20V/3.25A, 15V/3A, 12V/2.16A, 9V/1.8A, 5V/0.9A.
Display Area Full Scan

(H x V)

344.68 x 215.42 mm
13.57” x 8.48”
Operating Conditons Altitude 5 km
16,400 ft
Relative Humidity 20% to 90% (non-condensing)
Temperature 0° C to 40° C
32° F to 104° F
Storage Conditions Altitude 12.1 km
40, 000 ft
Relative Humidity 5% to 90% (non-condensing)
Temperature -20° C to 60° C
-4° F to 140° F
Dimensions Physical
(W x H x D)
356.7 x 234.9 x 9.9 mm
14.04” x 9.25” x 0.39”
Wall Mount Dimensions 100 x 100 mm
Weight Physical 0.8 kg
1.8 lb
Power Consumption On[4] 7.8W (Typical)
Off < 0.3W

Notes

  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. The power output needs to be more than 10W to turn on the monitor
  3. The power adapter is not included in the packaging.
  4. The test condition follows EEI standards.