• Print Print

VG2208A-HD Connecting Power and Devices

From ViewSonic Documentation
Revision as of 07:07, 4 September 2024 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=VG2208A-HD_Introduction |2=VG2208A-HD_Initial_Setup |3=VG2208A-HD_Connecting_Power_and_Devices |4=VG2208A-HD_Adjusting_the_Viewing_Angle |5=VG2208A-HD_Quick_Menu |6=VG2208A-HD_Hot_Keys |7=VG2208A-HD_On-Screen_Display_Menu |8=VG2208A-HD_On-Screen_Display_Menu_Tree |9=VG2208A-HD_Specifications |10=VG2208A-HD_Regulatory_and_Service_Information }} </noinclude> =Connecting to Power= <div class="res-img">File:VG2208A_Connect_Power.png...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VG2208A-HD Connecting Power and Devices
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Connecting to Power

Power connection
  1. Connect the power cord to the AC IN jack at the rear of the device.
  2. Plug the power cord plug into a power outlet.

Connecting to External Devices

Connecting external devices
Note: To activate the USB Type A port, make sure your computer is also connected to the monitor's USB Type B port.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VG2208A-HD_Connecting_Power_and_Devices&oldid=44599"