疑難排解

From ViewSonic Documentation
Revision as of 02:26, 14 November 2023 by Rob.vsi (talk | contribs) (Created page with "可能解決方法3")
Jump to: navigation, search

排除常見問題

常規

遙控器無效

可能解決方法1 檢查是否有物體阻礙顯示器的遙控器接收器。

可能解決方法2 檢查遙控器的電池極性,是否正確安裝。

可能解決方法3 檢查電池是否需要更換。

裝置意外關閉

可能解決方法1 檢查睡眠模式是否啟用。

可能解決方法2 檢查所在地區是否停電。

可能解決方法3 Turn on the display, provide an active signal, and see if the problem is with the signal or external control system.

What should I do if the power indicator is off and there is no response?

Solution 1 Ensure the power cable is connected and not loose.

Solution 2 Check that the power outlet is functioning properly and meets the required electrical requirement.

Why does the display not recognize the USB storage device?

Solution 1 Ensure the drive is either formatted for FAT32 or NTFS.

Solution 2 If the USB storage device needs external power, connect its power adapter to an electrical outlet.

Video Not Working Properly

Why is there no picure or sound?

Solution 1 Check the Power status.

Solution 2 Check the signal cable.

Solution 3 Use the remote control to ensure the input source setting is the same as the connected device.

What should I do if the picture is unclear or cuts in and out?

Solution 1 Check the signal cable.

Solution 2 Check if other electronics or different signal types are interrupting the signal.

Solution 3 An optional active video cable or optional video extender is required for a long distance source.

What should I do if the picture quality is poor?

Solution 1 Adjust chroma and/or brightness settings in the menu.

Solution 2 Check the signal cable.

Solution 3 Use the display’s native resolution for the source.

Audio Not Working Properly

Why is there no sound?

Solution 1 Press the Mute/Unmute button.

Solution 2 Adjust the volume.

Solution 3 Check the audio cable connection (if used).

Solution 4 If using a computer digital video with embedded audio, ensure the computer speakers are set to external speakers.

What should I do if sound is only coming from one speaker?

Solution 1 Adjust the sound balance in the menu.

Solution 2 Check the left and right sound control panel settings of the computer or media player source.

Solution 3 Check the audio cable connection (if used).

Solution 4 Ensure the content has two audio channels and not mono.

Module Brightness Calibration

Seam Line Brightness Adjustment

Online Support Center