TD2223-2 Connecting Power and Devices

From ViewSonic Documentation
Revision as of 03:30, 25 October 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=TD2223-2_Introduction |2=TD2223-2_Initial_Setup |3=TD2223-2_Connecting_Power_and_Devices |4=TD2223-2_Adjusting_the_Viewing_Angle |5=TD2223-2_Quick_Menu |6=TD2223-2_Hot_Keys |7=TD2223-2_On-Screen_Display_Menu |8=TD2223-2_On-Screen_Display_Menu_Tree |9=TD2223-2_Specifications |10=TD2223-2_Regulatory_and_Service_Information }} </noinclude> =Connecting to Power= <ol><li>Connect the power cord to the AC IN jack at the rear of the devic...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Connecting to Power

  1. Connect the power cord to the AC IN jack at the rear of the device.
  2. Plug the power cord plug into a power outlet.

Connecting External Devices

HDMI

DVI

VGA

Audio

USB

Touch Function Control

Touch Accuracy