• Print Print

VA1655 Initial Setup

From ViewSonic Documentation
Revision as of 05:29, 27 July 2021 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=VA1655_Introduction |2=VA1655_Initial_Setup |3=VA1655_Connecting_Power_and_Devices |4=VA1655_Adjusting_the_Viewing_Angle |5=VA1655_Qui...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VA1655 Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Tilt Angle Adjustment

Tilt the monitor backwards to the desired viewing angle via the attached stand (30˚ to 53˚).

File:VA1655 Cover Install.png
When adjusting, support the monitor firmly with one hand while tilting the stand backwards with the other hand.

Using the Stand


Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VA1655_Initial_Setup&oldid=12940"