• Print Print

AirPen Initial Setup

From ViewSonic Documentation
Revision as of 02:49, 4 January 2024 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Menu_VB-PEN-007 |1=VB-PEN-007_Introduction |2=VB-PEN-007_Initial_Setup |3=VB-PEN-007_Using_the_Pen |4=VB-PEN-007_Appendix |5=VB-PEN-007_Regulatory_and_Service_Information }} </noinclude> =Charging the AirPen (VB-PEN-007)= {{NOTE|Fully charge the AirPen (VB-PEN-007) before its first use.}} <div class="res-img">Charging the Pen|600px</div> <ol><li>Connect the USB Type C end of the included USB cable to the '''Charging...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VB-PEN-007 Initial Setup
Introduction
Initial Setup
Using the Pen
Specifications
Regulatory and Service Information

Charging the AirPen (VB-PEN-007)

Template:NOTE

Charging the Pen
  1. Connect the USB Type C end of the included USB cable to the Charging Port of the AirPen (VB-PEN-007).
  2. Then connect the other end, the USB Type A, of the cable to a USB Type A port of a display or other power delivering device.
  3. When charging, the LED Indicator will be a steady red. When fully charged, the VB-PEN-007 can provide four (4) hours of use.
    4. Template:NOTE

Powering On and Pairing the AirPen (VB-PEN-007)

Retrieved from "https://manuals.viewsonic.com/index.php?title=VB-PEN-007_Initial_Setup&oldid=38277"