From ViewSonic Documentation
TD2223-2 On-Screen Display Menu Tree
| Sub-menu
|
Menu Option
|
| Auto Image Adjust
|
|
| Contrast/Brightness
|
Contrast
|
(-/+, 0~100)
|
|
| Brightness
|
(-/+, 0~100)
|
| Input Select
|
VGA
|
|
| DVI
|
| HDMI
|
| Audio Adjust
|
Volume
|
(-/+, 0~100)
|
|
| Mute
|
On
|
|
| Off
|
| Audio Input
|
HDMI
|
| Audio In
|
| Color Adjust
|
sRGB
|
|
| Bluish
|
| Cool
|
| Native
|
| Warm
|
| User Color
|
Red
|
(-/+, 0~100)
|
| Green
|
(-/+, 0~100)
|
| Blue
|
(-/+, 0~100)
|
| Information
|
|
| Manual Image Adjust
|
H/V Position
|
Horizontal Position
|
(-/+, 0~100)
|
| Vertical Position
|
(-/+, 0~100)
|
| Horizontal Size
|
(-/+, 0~100)
|
|
| Fine Tune
|
(-/+, 0~100)
|
| Sharpness
|
(-/+, 0~100)
|
| Dynamic Contrast
|
On
|
| Off
|
| Response Time
|
Standard
|
| Advanced
|
| Ultra Fast
|
| Aspect Ratio
|
4:3
|
| Full Screen
|
| Overscan
|
On
|
| Off
|
| ECO Mode
|
Standard
|
| Optimize
|
| Conserve
|
| Blue Light Filter
|
(-/+, 0~100)
|
| Setup Menu
|
Language Select
|
English
|
|
| Français
|
| Deutsch
|
| Español
|
| Italiano
|
| Suomi
|
| Русский
|
| Türkçe
|
| 日本語
|
| 한국어
|
| 繁體中文
|
| 简体中文
|
| Česká
|
| Svenska
|
| Tiếng Việt
|
| Resolution Notice
|
On
|
|
| Off
|
| OSD Position
|
H. Position
|
(-/+, 0~100)
|
| V. Position
|
(-/+, 0~100)
|
| OSD Pivot
|
0°
|
|
| +90°
|
| -90°
|
| OSD Timeout
|
(-/+, 5/15/30/60)
|
|
| OSD Background
|
On
|
|
| Off
|
| Auto Power Off
|
On
|
|
| Off
|
| Sleep
|
30 minutes
|
|
| 45 minutes
|
| 60 minutes
|
| 120 minutes
|
| Power Indicator
|
On
|
|
| Off
|
| Boot Up Screen
|
On
|
|
| Off
|
| Touch Screen[1]
|
Single Point Touch
|
On
|
| Off
|
| Touch Disable
|
On
|
| Off
|
| Memory Recall
|
|
- ↑ When switching between modes, or when you want to cancel Touch Mode, please clean the surface of the device first and keep the surface clean from water droplets and fingerprints.
Touch Screen Modes - Additional Information
| Mode
|
Note
|
| Pen Touch Mode
|
- Pencil touch support (2 mm).
- Stylus touch support (3.5 mm).
- Supports various active pens and click touch:
- MPP 2.0
- Apple
- Wacom AES
- Google USI
- Supports pen click and basic writing. Do not write too quickly.
- Supports palm rejection (25 mm x 25 mm).
- When a pen and a finger are both on the TD2465, only the pen signal will be detected. Handwriting and pen writing cannot operate at the same time.
- Does not support touch input with wet hands.
Does not support active pen protocol or pressure levels.
|
| Glove Touch Mode
|
- Supports various types of glove material.
- NOTE: Supported glove material can be found on the TD2465 product page.
- Supports one finger touch and click, or two fingers gesture; up to 5-point touch.
- Do not move your finger(s) too quickly.
- Gloves should be fitted and close to your fingers.
- Palm rejection is not supported.
|
| Water Resistant Touch Mode
|
- Touch supported even with some moisture on the screen.
- A moving water droplet will not cause an incorrect input.
- Supports one finger touch and click; up to 5-point touch.
- Do not move your finger(s) too quickly.
- Palm rejection is not supported.
|