• Print Print

VG2208A Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
VY (talk | contribs)
7,615 edits
Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=VG2208A_Introduction |2=VG2208A_Initial_Setup |3=VG2208A_Connecting_Power_and_Devices |4=VG2208A_Adjusting_the_Viewing_Angle |5=VG2208A_Quick_Menu |6=VG2208A_Hot_Keys |7=VG2208A_On-Screen_Display_Menu |8=VG2208A_On-Screen_Display_Menu_Tree |9=VG2208A_Specifications |10=VG2208A_Regulatory_and_Service_Information }} </noinclude>"
 
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
Line 13: Line 13:
}}
}}
</noinclude>
</noinclude>
=Before Installing the Stand=
Please follow the guidelines below when handling the monitor stand.
{{Note|lease make sure that the stand is firmly attached to the monitor before raising it upright, and then remove the bolt.}}
<div class="res-img">[[File:VG2208A_Before_Install.PNG|400px|link=]]</div>
=Stand Installation=
<div class="res-img">[[File:VG2208A_Install_1.PNG|330px|Align the points]]</div>
{{Note|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}
=Wall Mounting=
Refer to the table below for the standard dimensions for mounting kits.
{{Note|For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer}}
{| class="wikitable" style="text-align: center; width: 70%; background-color:#ffffff;"
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
! style="background-color:#DB0025; color:#ffffff;" | Hole Pattern<br /> (W x H)
! style="background-color:#DB0025; color:#ffffff;" | Interface Pad<br /> (W x H x D)
! style="background-color:#DB0025; color:#ffffff;" | Pad Hole
! style="background-color:#DB0025; color:#ffffff;" | Screw Specification
! style="background-color:#DB0025; color:#ffffff;" | Screw Quantity
|-
|14 kg
|100 x 100 mm
|N/A
|Ø 5 mm
|M4 x 10 mm
|4 screws
|}
<ol>
    <li>Turn off the device and disconnect all cables.</li>
    <li>Place the device on a flat, stable surface with the screen facing down.</li>
    <li>
        <p>Remove the monitor stand.</p>
        <div class="res-img">[[File:VG2208A_Wall_Mount_2.PNG|300px|Disengage the hooks]]</div>
    </li>
    <li> Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).</li>
    <li> Follow the instructions that come with the wall mounting kit to mount the monitor.</li>
</ol>
<noinclude>
=Using the Security Slot=
''Please see'' [[Monitor_Security_Slot| Using the Security Slot]].
</noinclude>
{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VG2208A, stand installation, wall mounting, VESA
|description=How to install and uninstall the stand on the VG2208A monitor.
}}
[[Category:VG2208A]]

Revision as of 02:39, 2 September 2024

VG2208A Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Before Installing the Stand

Please follow the guidelines below when handling the monitor stand.

Note: lease make sure that the stand is firmly attached to the monitor before raising it upright, and then remove the bolt.
File:VG2208A Before Install.PNG

Stand Installation

Align the points
Note: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting

Refer to the table below for the standard dimensions for mounting kits.

Note: For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer
Maximum Loading Hole Pattern
(W x H) 		Interface Pad
(W x H x D) 		Pad Hole Screw Specification Screw Quantity
14 kg 100 x 100 mm N/A Ø 5 mm M4 x 10 mm 4 screws
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.

  3. Remove the monitor stand.

    Disengage the hooks
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).
  5. Follow the instructions that come with the wall mounting kit to mount the monitor.


Using the Security Slot

Please see Using the Security Slot.

Retrieved from "https://manuals.viewsonic.com/index.php?title=VG2208A_Initial_Setup&oldid=44315"