• Print Print

VX2528J Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
Line 45: Line 45:
     <li>
     <li>
         <p>Remove the monitor stand.</p>
         <p>Remove the monitor stand.</p>
         <div class="res-img">[[File:VX2528J_Stand_Remove.png|700px]]</div>
         <div class="res-img">[[File:VX2528J_Stand_Remove.png|400px]]</div>
     </li>
     </li>
     <li>
     <li>
         <p>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</p>
         <p>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</p>
         <div class="res-img">[[File:VX2528J_VESA.png|350px]]</div>
         <div class="res-img">[[File:VX2528J_VESA.png|400px]]</div>
     </li>
     </li>
     <li>Follow the instructions that come with the mounting kit to mount the monitor.</li>
     <li>Follow the instructions that come with the mounting kit to mount the monitor.</li>

Revision as of 08:59, 2 July 2024

VX2528J Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Installing the Stand


Note: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Removing the Stand and Mounting the Display

Refer to the table below for the standard dimensions for mounting kits.

Note: For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum
Loading 		Hole Pattern
(W x H) 		Interface Pad
(W x H x D) 		Pad Hole Screw
Specification 		Screw
Quantity
14 kg 75 x 75 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm 4 screws
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.

  3. Remove the monitor stand.

  4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).

  5. Follow the instructions that come with the mounting kit to mount the monitor.

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

Using the Security Slot
Retrieved from "https://manuals.viewsonic.com/index.php?title=VX2528J_Initial_Setup&oldid=42020"