VX2528J Specifications

Technical Specifications

Item	Category	Specifications
LCD	Type	Color a-Si TFT Active Matrix 1920 x 1080 LCD; 0.2832 (H)mm x 0.2802 (V)mm pixel pitch
	Display Size	62.2 cm (24.5” (real diagonal)
	Color Filter	RGB vertical stripe
	Glass Surface	Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal	Video Sync	TMDS digital (100 Ω) DisplayPort (v. 1.2): f_h:30~160 kHz, f_v:48~180 Hz HDMI (v. 2.0): f_h:30~160 kHz, f_v:48~144 Hz
Compatibility	PC	up to 1920 x 1080
Compatibility	Macintosh	up to 1920 x 1080
Resolution^[1]	Recommended	1920 x 1080 @ 180 Hz
Resolution^[1]	Supported	1920 x 1080 @ 50, 60, 120, 180 Hz 1680 x 1050 @ 60 Hz 1600 x 1200 @ 60 Hz 1600 x 900 @ 60 Hz 1440 x 900 @ 60, 75 Hz 1440 x 576 @ 50 Hz 1400 x 1050 @ 60, 75 Hz 1366 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1280 x 1024 @ 50, 60, 75 Hz 1280 x 960 @ 50, 60, 75 Hz 1280 x 800 @ 60, 75 Hz 1280 x 768 @ 50, 60, 75 Hz 1280 x 720 @ 50, 60 Hz 1152 x 870 @ 75 Hz 1152 x 864 @ 75 Hz 1024 x 768 @ 50, 60, 70, 75 Hz 1024 x 600 @ 60 Hz 848 x 480 @ 60 Hz 832 x 624 @ 75 Hz 800 x 600 @ 56, 60, 72, 75 Hz 720 x 576 @ 50 Hz 720 x 480 @ 60 Hz 640 x 480 @ 60, 66, 72, 75 Hz
Power^[2]	Input Voltage	AC 100-240V, 50/60Hz (auto switch)
Display Area	Full Scan (H x V)	543.744 x 302.616 mm (21.41” x 11.91”)
Operating Conditons	Temperature	0° C to 40° C (32° F to 104° F)
	Humidity	20% to 90% (non-condensing)
	Altitude	5 km (16,404.2 ft)
Storage Conditions	Temperature	-20° C to 60° C (-4° F to 140° F)
	Humidity	5% to 90% (non-condensing)
	Altitude	12 km (39,370.1 ft)
Dimensions (With Stand)	Physical (W x H x D)	557.5 x 413.6~513.6 x 206.6 mm (21.9” x 16.3”~20.2” x 8.1")
Dimensions (Without Stand)	Physical (W x H x D)	557.5 x 327 x 53.1 mm (21.9” x 12.87” x 2.1”)
Wall Mount	Dimensions	100 x 100 mm
Weight (With Stand)	Physical	3.83 kg (8.4 lbs)
Weight (Without Stand)	Physical	2.6 kg (5.7 lbs)
Power Consumptio	On^[3]	16W (Typical) without audio 17W (Typical) with 50% audio
Power Consumptio	Off	≤ 0.3W

↑ Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
↑ Please use the power adapter from ViewSonic® or an authorized source only.
↑ The test condition follows EEI standards.

[1] Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.

[2] Please use the power adapter from ViewSonic® or an authorized source only.

[3] The test condition follows EEI standards.

[1]

[2]

[3]