IFP55G1 Using Your ViewBoard

Powering ON/OFF your ViewBoard

1. Ensure the power cord is connected, plugged into a power outlet, and the Power Switch is in the “ON” position.
   

   Note: The AC Power input and Power Switch are located at the bottom of the display.

2. Press the Power button to turn ON the ViewBoard.
   

3. To turn the ViewBoard OFF, press and hold the Power button.

On-Screen Display (OSD) Menu Tree

Main Menu	Sub-menu	Menu Option
VGA	H Position	(-/+, 0~100)
	V Position	(-/+, 0~100)
	Clock	(-/+, 0~100)
	Clock Phase	(-/+, 0~100)
	Zoom Mode	Full
		Normal (4:3)
		Real (1:1)
		Dynamic (16:9)
		21:9
	Auto Adjust	OK
	Screen Reset	Cancel
		Reset
Input Source	VGA
	HDMI 1
	HDMI 2
	HDMI 3
	PC
	Type-C
WriteAway	Off
	Except PC (OPS)
	No Signal Input Only
	Black Board Mode (Auto Signal Detection: Off)
Picture	Picture Mode	Normal
		Dynamic
		Soft
		User
	Contrast	(-/+, 0~100)
	Brightness	(-/+, 0~100)
	Color	(-/+, 0~100)
	Tint	(-/+, 0~100)
	Sharpness	(-/+, 0~100)
	Color Temperature	Warm (7500K)
		Normal (9300K)
		Cool (10000K)
		User
	Noise Reduction	Off
		Low
		Medium
		High
	Overscan	off
		On
	RGB Range	Full Range
		Limited Range
		Auto
	Flicker Free	Off
		On
	Blue Light Filter	(-/+, 0~100)
	Gamma Set	Native
		2.2
		2.4
	Backlight	(-/+, 0~100)
	Picture Reset	Cancel
		Reset
Audio	Volume Control	Speaker
		Audio Out
		Sync
	Treble	(-/+, 0~100)
	Bass	(-/+, 0~100)
	Balance	(-/+, 0~100)
	Volume	(-/+, 0~100)
	Maximum Volume	(-/+, 0~100)
	Minimum Volume	(-/+, 0~100)
	Mute	Off
		On
	Audio Out Sync	Enable
		Disable
	Audio Out Volume (Line Out)	(-/+, 0~100)
	Audio Reset	Cancel
		Reset
Time	Off Time	Off
		1 hour~24 hours
	Date and Time	Set Date
		Set Time
		Choose Time Zone
		Use 24-hour Format
	Schedule	Schedule List
		Enable
		Start Time
		End Time
		Input	HDMI 1
			HDMI 2
			HDMI 3
			PC
			Type-C
			VGA
		Dat of the Week
		Every Week
	OSD Turn Off	Off
		5/15/30/60 seconds
	Input Information	Off
		5/10/20/30/60 seconds
	Automatic Date & Time	Off
		On
	Time Reset	Cancel
		Reset
About	Display Information	Model Name
		Serial No.
		Operation Hours
		SW Version
Advanced Options	Saving	Panel Saving	Brightness	Off
				On
		Power Save	Mode 1
			Mode 2
			Mode 3
			Mode 4
		Power LED Light	Off
			On
	Boot	Boot On Source	HDMI 1
			HDMI 2
			HDMI 3
			PC
			Type-C
			VGA
		Boot On Logo	Off
			On
	Signal	Auto Signal Detection	Off
			On
		No Signal Standby	off
			0 mins
			5 mins
			15 mins
			30 mins
	Port	HDMI with One Wire	Off (default)
			On
		USB Cloning	Import
			Export
		USB Auto Play	Off
			On
	Others	Switch On State	Power Off
			Forced On
			Last Status
		WOL	Off
			On
			Monitor ID 1~98
		OSD Language
		Factory Reset	Cancel
			Reset
		Advanced Option Reset	Cancel
			Reset
Other Settings	Energy Start	Off
		On
	Light Sensor	Off
		On
	IP
	Port
Leave OSD Menu	Leave OSD Menu

On-Screen Display (OSD) Menu Operation

Access VGA, Input Source, WriteAway, Picture, Audio, Time, About, Advanced Options, and Other Settings settings through the OSD Menu.

Open the OSD Menu by pressing MENU on the remote control or the Menu button on the front Control Panel.

VGA

Note: For VGA input source only.

Item	Description
H Position	Adjust the screen image position horizontally.
V Position	Adjust the screen image position vertically.
Clock	Adjust the frequency of the pixel clock signal. This will affect the resolution and refresh rate.
Clock Phase	Adjust the clock phase to improve the display’s clarity and avoid flickering.
Zoom Mode	Select the aspect ratio of the display.
Auto Adjust	Automatically adjust the position of the screen image.
Screen Reset	Reset the Screen settings to their default settings.

Input Source

Select one of the available input sources.

WriteAway

Item	Description
Off	Turn off the WriteAway function.
Except PC (OPS)	Can be used for all channels, except OPS.
No Signal Input Only	Can be used when there is no signal input.
Black Board Mode (Auto Signal Detection: Off)	Can be used when there is no signal input; auto-detection will be disabled.

Picture

Item	Description
Picture Mode	Select a predefined picture setting. Mode Description Normal Default picture mode. Dynamic Picture will adjust according to the on-screen content. Soft A high brightness level with lower contrast level. User User’s custom settings.
Contrast	Adjusts the difference between the image background (black level) and the foreground (white level). Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
Brightness	Adjusts background black levels of the screen image. The higher the value, the brighter the image. Lower values will result in a darker image.
Color	Adjust an image from black and white to fully saturated color.
Tint	The higher the value, the more greenish the picture becomes. The lower the value, the more reddish the picture becomes.
Sharpness	A high value results in a sharper picture; a low value softens the picture.
Color Temperature	Adjust the color temperature value. Mode Description Warm Set the color temperature to 7500K. Normal Set the color temperature to 9300K. Cool Set the color temperature to 10,000K. User User's custom settings
Noise Reduction	Reduce image noise and distortion.
Overscan	Automatically enlarge the original picture horizontally and vertically to an equal aspect ratio that fills the screen.
RGB Range	Manually change the color format options to fit the correct color format range if the colors are not displayed correctly.
Flicker Free	Reduce or eliminate screen flicker.
Blue Light Filter	Adjust the filter that blocks high-energy blue light for a more comfortable viewing experience.
Gamma Set	Reflect the relationship between input source and picture brightness.
Backlight	Adjust the backlight value.
Picture Reset	Reset the Picture settings to their default settings.

Audio

Item	Description
Volume Control	Select which component has sound and controls the volume. Mode Description Speaker Only the display’s speakers will have sound and the remote control will control the speakers’ volume. Audio Out Only Audio Out will have sound and the remote control will control Audio Out’s volume. Sync Both the Speaker and Audio Out will have sound.
Treble	Increase or decrease the treble level (higher-pitched sounds).
Bass	Increase or decrease the bass level (lower-pitched sounds).
Balance	Adjust the left/right speaker balance.
Volume	Increase or decrease the display’s volume level.
Maximum Volume	Set the display’s maximum volume level.
Minimum Volume	Set the display’s minimum volume level.
Mute	Toggle mute on or off.
Audio Out Sync	Sync the Audio Out Volume (Line Out) with the display’s speakers.
Audio Out Volume (Line Out)	Increase or decrease the Audio Out volume level.
Audio Reset	Reset the Audio settings to their default settings.

Time

Item	Description
Off Time	Set a time for the ViewBoard to automatically power off.
Date and Time	Set the ViewBoard’s system time and format.
Schedule	Set up to seven different time intervals for the display to be active.
OSD Turn Off	Set the length of time the OSD Menu remains on screen.
Input Information	Set the length of time the input information will be displayed on the display.
Automatic Date & Time	Automatically set the date and time.
Time Reset	Reset the Time settings to their default settings.

About

Item	Description
Display Information	See information about the display: Model Name, Serial No., Operation Hours, and Software Version.

Advanced Options

Item	Description
Saving	Panel Saving When enabled, the ViewBoard display’s brightness will be limited to 40% of its maximum brightness level. Power Save Select one of the power saving modes to enable power saving. Mode Description Mode 1 TCP off, WOL on. Mode 2 TCP off, WOL on, wake up by video signal resume. Mode 3 TCP on, WOL off, wake up by video signal resume. Mode 4 TCP on, WOL off, no wake up by video signal resume support. Power LED Light Turn on/off the ViewBoard’s power indicator light.
Boot	Boot On Source Select which input source to use when the Viewboard is powered on. Boot On Logo Select a boot up logo to display when the ViewBoard is starting.
Signal	Auto Signal Detection Enable to automatically detect input sources and display them. No Signal Standby Enable to go to standby mode when there is no input source detected.
Port	HDMI with One Wire When ON, HDMI CEC will be enabled. HDMI CEC synchronizes device power on/off operation via HDMI connection. USB Cloning Import/export OSD Settings to a USB storage device. USB Auto Play When on, the ViewBoard will copy media files from an external storage device (e.g., USB drive) to internal storage, then play the media files automatically.
Others	Switch On State Select the display status for the next time the power cord is connected to a power outlet. Mode Description Power Off The ViewBoard will remain OFF when the power cord is connected. Forced On The ViewBoard will turn ON when the power cord is connected. Last Status The display will return to the previous power status. WOL (Wake On LAN) When on, the ViewBoard will turn ON automatically after plugging in a LAN cable when the screen is off. Monitor ID Assign a number to remote control the display by RS-232. NOTE: The number range is: 1~98; 99 is reserved for “All Displays”. OSD Language Set the preferred language for the ViewBoard. Factory Reset Reset all OSD Menu settings to their default settings. Advanced Options Reset Reset the Advanced Options settings to their default settings.

Other Settings

Item	Description
Energy Star	Toggle Energy Star on or off.
Light Sensor	Toggle the light sensor on or off.
IP	View the current IP address.
Port	View the current port number.

Leave OSD Menu

Exit the OSD Menu.