• Print Print

VX2705-2KP-mhd Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
No edit summary
No edit summary
Line 19: Line 19:


{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}
=Wall Mounting=
Refer to the table below for the standard dimensions for wall mount kits.
{{Note-yellow|For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}
{| class="wikitable" style="text-align: center;"
! style="background-color:#c41230; color:#ffffff;" | Maximum Loading
! style="background-color:#c41230; color:#ffffff;" | Hole Pattern (W x H)
! style="background-color:#c41230; color:#ffffff;" | Interface Pad (W x H x D)
! style="background-color:#c41230; color:#ffffff;" | Pad Hole
! style="background-color:#c41230; color:#ffffff;" | Screw Specification & Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm - 4 pieces
|}
# Turn off the device and disconnect all cables.
# Place the device on a flat, stable surface with the screen facing down.
# Pull down slightly to disengage the hooks. Then remove the stand.
# Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
# Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
<gallery widths=200px heights=200px mode="nolines">
VP3481_Wall_Mount_1.png| Disengage the hooks
VP3481_Wall_Mount_2.png| VESA mounting points
</gallery>
<noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude>


[[Category:VX2705-2KP-mhd]]
[[Category:VX2705-2KP-mhd]]

Revision as of 08:08, 14 August 2020

VX2705-2KP-mhd Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Advanced Features and Settings
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Stand Installation

Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.

For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum Loading Hole Pattern (W x H) Interface Pad (W x H x D) Pad Hole Screw Specification & Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Pull down slightly to disengage the hooks. Then remove the stand.
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
  5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
  • Disengage the hooks
    Disengage the hooks
  • VESA mounting points
    VESA mounting points

Using the Security Slot

Retrieved from "https://manuals.viewsonic.com/index.php?title=VX2705-2KP-mhd_Initial_Setup&oldid=3584"