CDE4312 Remote Control: Difference between revisions
From ViewSonic Documentation
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|3=CDE4312_Connecting_Devices | |3=CDE4312_Connecting_Devices | ||
|4=CDE4312_Using_the_Display | |4=CDE4312_Using_the_Display | ||
|5= | |5=CDE4312_General_Settings | ||
|6= | |6=CDE4312_On-Screen_Display_Menu | ||
|7=CDE4312_Embedded_Applications | |7=CDE4312_Embedded_Applications | ||
|8=CDE4312_RS-232_Protocols | |8=CDE4312_RS-232_Protocols | ||
Revision as of 07:37, 12 August 2022
Remote Control Overview

| Number | Description |
|---|---|
| 1 | Power ON/OFF |
| 2 | Screen capture |
| 3 | Back to the Launcher screen |
| 4 | Back/Return to the previous page |
| 5 | Increase/Decrease the volume |
| 6 | Number Keypad |
| 7 | Information |
| 8 | Input source selection |
| 9 | Media control buttons: Red - Play / Pause |
| 10 | Settings menu |
| 11 | Up/Down/Right/Left/OK |
| 12 | Freeze Screen |
| 13 | Mute/Unmute |
| 14 | Increase/Decrease Brightness |
| 15 | Blank Screen |
| 16 | Adjust Aspect Ratio |
Remote Control Effective Range
The working range of the remote control is shown here. It has an effective range of 6 meters, 30° degrees left and right. Ensure there is nothing obstructing the remote control’s signal to the receiver.
Replacing the Batteries of the Remote Control
- Remove the cover on the rear of the remote control.
- Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post.
- Replace the cover by aligning it with the slot on the remote control and snapping the latch shut.
There is a risk of explosion if batteries are replaced with the incorrect type.
- NOTE:
- It is recommended that you do not mix battery types.
- Always dispose of old batteries in an environmentally friendly way. Contact your local government for more information on how to dispose of batteries safely.
- NOTE: