• Print Print

CDE4312 Using the Display: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
No edit summary
No edit summary
Line 5: Line 5:
|3=CDE4312_Connecting_Devices
|3=CDE4312_Connecting_Devices
|4=CDE4312_Using_the_Display
|4=CDE4312_Using_the_Display
|5=CDE4312_On-Screen_Display_Menu
|5=CDE4312_General_Settings
|6=CDE4312_Embedded_Player
|6=CDE4312_On-Screen_Display_Menu
|7=CDE4312_Embedded_Applications
|7=CDE4312_Embedded_Applications
|8=CDE4312_RS-232_Protocols
|8=CDE4312_RS-232_Protocols

Revision as of 07:36, 12 August 2022

CDE4312 Using the Display
Introduction
Remote Control
Connecting Devices
Using the Display
General Settings
On-Screen Display (OSD) Menu
Embedded Applications
RS-232 Protocols
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Power On/Off your ViewBoard

  1. Ensure the power cord is connected, plugged into a power outlet, and the power switch is in the “On” position.
    2. NOTE: The AC IN socket is located at the rear, and the Power Switch is located underneath the display.
  2. Press the Power button to turn on the display.
  3. To turn the display off, press and hold the Power button.

Initial Launch Setup

When you first turn on your display, an initial setup wizard will launch.

  • Language Select
    Language Select
  • Time Zone
    Time Zone
  • Power Saving Mode
    Power Saving Mode
  • Privacy and Copyright Protection
    Privacy and Copyright Protection
  1. Select your Language.
  2. Select your Time Zone.
  3. Select your Power Saving Mode.
  4. Accept/Decline the Privacy and Copyright Protection Agreement.

Home Screen

From the Home Screen all the installed applications can be accessed.

NOTE: Press the Home button on the remote control at any time to return to the Home Screen.
Retrieved from "https://manuals.viewsonic.com/index.php?title=CDE4312_Using_the_Display&oldid=20873"