• Print Print

VG2208A-HD Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 28: Line 28:
:*Mounting kits are sold separately.
:*Mounting kits are sold separately.
}}
}}
{| class="wikitable" style="text-align: center; width: 70%; background-color:#ffffff;"
{| class="wikitable" style="text-align: center; width: 70%; background-color:#ffffff;"
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
Line 44: Line 43:
|4 screws
|4 screws
|}
|}
 
<ol><li>Turn off the device and disconnect all cables.</li>
<ol>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
    <li>Turn off the device and disconnect all cables.</li>
<li>Remove the monitor stand.
    <li>Place the device on a flat, stable surface with the screen facing down.</li>
<div class="res-img">[[File:VG2208A_Wall_Mount_1.png|600px|Monitor stand removal]]</div></li>
    <li>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).
        <p>Remove the monitor stand.</p>
<div class="res-img">[[File:VG2208A_Wall_Mount_2.png|400px|alt=monitor hook removeal]]</div></li>
        <div class="res-img">[[File:VG2208A_Wall_Mount_1.png|600px|alt=monitor hook removeal]]</div>
<li>Follow the instructions that come with the optional wall mounting kit to mount the monitor.</li></ol>
    </li>
 
    <li>
        <p>Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).</p>
        <div class="res-img">[[File:VG2208A_Wall_Mount_2.png|400px|alt=monitor hook removeal]]</div>
    </li>
    <li> Follow the instructions that come with the wall mounting kit to mount the monitor.</li>
</ol>


<noinclude>
<noinclude>

Revision as of 06:58, 4 September 2024

VG2208A-HD Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Before Installing the Stand

Please follow the guidelines below when handling the monitor stand.

Note: Please make sure that the stand is firmly attached to the monitor before raising it upright, and then remove the bolt.
Before installing the stand

Installing the Stand

Stand installation process
Note: For safety and to ensure optimal performance, please position the monitor on a flat, stable surface. Failure to do so may lead to the monitor falling, causing damage to the monitor itself and/or posing a risk of personal injury.

Removing the Stand and Mounting the Monitor

Refer to the table below for the standard dimensions for mounting kits.

Note:
  • For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
  • Mounting kits are sold separately.
Maximum Loading Hole Pattern
(W x H) 		Interface Pad
(W x H x D) 		Pad Hole Screw Specification Screw Quantity
14 kg 100 x 100 mm N/A Ø 5 mm M4 x 10 mm 4 screws
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Remove the monitor stand.
    Monitor stand removal
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).
    monitor hook removeal
  5. Follow the instructions that come with the optional wall mounting kit to mount the monitor.


Using the Security Slot

Please see Using the Security Slot.

Retrieved from "https://manuals.viewsonic.com/index.php?title=VG2208A-HD_Initial_Setup&oldid=44592"