![Print](INVALID-TITLE:<span style="margin-right:10px;"></span><span class="d-none d-md-inline"><span id="t-print" style="position: relative;bottom:2px; left:1%; z-index:9999; padding:0; margin:0;">[[File:Icon_Print.svg|Print|1px|link=http://localhost/stage/tango/index.php?title=TD2223-2_Initial_Setup&printable=yes]]</span></span>
<span class="d-none d-md-inline"><span id="t-print" style="position: relative;bottom:2px; left:1%; z-index:9999; padding:0; margin:0;">[[File:Icon_Print.svg|Print|30px|link=http://localhost/stage/tango/index.php?title=TD2223-2_Initial_Setup&printable=yes]]</span></span>
[[Category:Template]]
[[Category:Archive]]){kind=small}
TD2223-2 Initial Setup: Difference between revisions
From ViewSonic Documentation
Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=TD2223-2_Introduction |2=TD2223-2_Initial_Setup |3=TD2223-2_Connecting_Power_and_Devices |4=TD2223-2_Adjusting_the_Viewing_Angle |5=TD2223-2_Quick_Menu |6=TD2223-2_Hot_Keys |7=TD2223-2_On-Screen_Display_Menu |8=TD2223-2_On-Screen_Display_Menu_Tree |9=TD2223-2_Specifications |10=TD2223-2_Regulatory_and_Service_Information }} </noinclude> =Installing the Stand= <ol><li>Place the monitor on a flat, stable surface with the screen faci..." |
|||
| Line 49: | Line 49: | ||
=Using the Security Slot= | =Using the Security Slot= | ||
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. | To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. | ||
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over. | Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over. | ||
Below is an example of setting up a security slot locking device on a table. | Below is an example of setting up a security slot locking device on a table. | ||
<div class="res-img">[[File:TD2223-2_Using_Security_Slot.png|400px|Using the Security Slot]]</div> | <div class="res-img">[[File:TD2223-2_Using_Security_Slot.png|400px|Using the Security Slot]]</div> | ||
Revision as of 03:27, 25 October 2023
Installing the Stand
- Place the monitor on a flat, stable surface with the screen facing down.
- With one hand applying downward pressure on the monitor, carefully lift and extend the stand.
- Lift the device into its upright position on a flat, stable surface.
- NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Removing the Stand and Mounting the Display
Refer to the table below for the standard dimensions for mounting kits.
For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
| Maximum Loading | Hole Pattern (W x H) | Interface Pad (W x H x D) | Pad Hole | Screw Specification | Screw Quantity |
|---|---|---|---|---|---|
| 14 kg | 100 x 100 mm | 115 x 115 x 2.6 mm | Ø 5 mm | M4 x 10 mm | 4 screws |
- Turn off the device and disconnect all cables.
- Place the device on a flat, stable surface with the screen facing down.
- Unscrew the attached stand and carefully remove it.
- Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
- Follow the instructions that come with the mounting kit to mount the monitor.
Using the Security Slot
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.
Below is an example of setting up a security slot locking device on a table.
