• Print Print

PD0521 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
No edit summary
Line 1: Line 1:
<noinclude> __NOTOC__
<noinclude> __NOTOC__
{{Sticky_Menu_Pen_Display_No_Adj
{{Sticky_Menu_PD0521
|1=PD0521_Introduction
|1=PD0521_Introduction
|2=PD0521_Making_Connections
|2=PD0521_Making_Connections
|3=PD0521_Using_the_Display
|3=PD0521_Using_the_Display
|4=PD0521_Setting_the_Display_Area
|4=PD0521_Specifications
|5=PD0521_Pen_Input_Area_Mapping
|5=PD0521_Regulatory_and_Service_Information
|6=PD0521_Specifications
|7=PD0521_Regulatory_and_Service_Information
}}
}}
</noinclude>
</noinclude>

Revision as of 10:44, 11 August 2023

PD0521 Making Connections
Introduction
Making Connections
Using the Display
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Installing Drivers and Software

System Requirements

Operating system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above

ViewSign Standard software is the recommended software to use with PD0521 for PDF signing.

To learn more about the ViewSign Standard software, please see: ViewSign Software.

NOTE: If you want to use the full version of the ViewSign Standard Software, please contact customer service at: https://www.viewsonic.com.

Connecting the Signature Pad

  1. Turn the device over so the bottom side is facing up.
  2. Connect the Micro USB end of the USB cable to the Micro USB Port on the device.
  3. Connect the other end of the USB cable to a computer.
Retrieved from "https://manuals.viewsonic.com/index.php?title=PD0521_Making_Connections&oldid=29919"