• Print Print

VG2208A-HD Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=VG2208A-HD_Introduction |2=VG2208A-HD_Initial_Setup |3=VG2208A-HD_Connecting_Power_and_Devices |4=VG2208A-HD_Adjusting_the_Viewing_Angle |5=VG2208A-HD_Quick_Menu |6=VG2208A-HD_Hot_Keys |7=VG2208A-HD_On-Screen_Display_Menu |8=VG2208A-HD_On-Screen_Display_Menu_Tree |9=VG2208A-HD_Specifications |10=VG2208A-HD_Regulatory_and_Service_Information }} </noinclude> =Before Installing the Stand= Please follow the guidelines below when handl..."
 
 
(8 intermediate revisions by the same user not shown)
Line 16: Line 16:
Please follow the guidelines below when handling the monitor stand.
Please follow the guidelines below when handling the monitor stand.
{{Note|Please make sure that the stand is firmly attached to the monitor before raising it upright, and then remove the bolt.}}
{{Note|Please make sure that the stand is firmly attached to the monitor before raising it upright, and then remove the bolt.}}
<div class="res-img">[[File:VG2208A_Before_Install.png|600px|alt=safety precautions]]</div>
<div class="res-img">[[File:VG2208A_Before_Install.png|800px|Before installing the stand]]</div>


=Installing the Stand=
=Installing the Stand=
<div class="res-img">[[File:VG2208A_Install_1.png|500px|alt=Stand installation process]]</div>
<div class="res-img">[[File:VG2208A_Install_1.png|400px|Stand installation process]]</div>
{{Note|Always place the monitor on a flat, stable surface. Failure to do so may cause the monitor to fall and damage the monitor and/or result in personal injury.}}
{{Note|For safety and to ensure optimal performance, please position the monitor on a flat, stable surface. Failure to do so may lead to the monitor falling, causing damage to the monitor itself and/or posing a risk of personal injury.}}


=Removing the Stand and Mounting the Monitor=
=Removing the Stand and Mounting the Monitor=
Line 28: Line 28:
:*Mounting kits are sold separately.
:*Mounting kits are sold separately.
}}
}}
{| class="wikitable" style="text-align: center; width: 70%; background-color:#ffffff;"
{| class="wikitable" style="text-align: center; width: 70%; background-color:#ffffff;"
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
Line 44: Line 43:
|4 screws
|4 screws
|}
|}
<ol><li>Turn off the monitor and disconnect all cables.</li>
<li>Place the monitor on a flat, stable surface with the screen facing down.</li>
<li>Remove the monitor stand.
<div class="res-img">[[File:VG2208A_Wall_Mount_1.png|700px|Monitor stand removal]]</div></li>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).
<div class="res-img">[[File:VG2208A-HD_VESA.png|400px|VESA mounting holes]]</div></li>
<li>Follow the instructions that come with the optional wall mounting kit to mount the monitor.</li></ol>
=Using the Security Slot=
To help prevent the monitor from being stolen, use a security slot locking device to secure the monitor to a fixed object.


<ol>
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.
    <li>Turn off the device and disconnect all cables.</li>
    <li>Place the device on a flat, stable surface with the screen facing down.</li>
    <li>
        <p>Remove the monitor stand.</p>
        <div class="res-img">[[File:VG2208A_Wall_Mount_1.png|600px|alt=monitor hook removeal]]</div>
    </li>


    <li>
Below is an example of setting up a security slot locking device on a table.
        <p>Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).</p>
<div class="res-img">[[File:VG2208A-HD_Security_Slot.png|500px|Using the security slot lock]]</div>
        <div class="res-img">[[File:VG2208A_Wall_Mount_2.png|400px|alt=monitor hook removeal]]</div>
    </li>
    <li> Follow the instructions that come with the wall mounting kit to mount the monitor.</li>
</ol>


<noinclude>


=Using the Security Slot=
''Please see'' [[Monitor_Security_Slot| Using the Security Slot]].
</noinclude>


{{#seo:
{{#seo:

Latest revision as of 07:09, 4 September 2024

VG2208A-HD Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Before Installing the Stand

Please follow the guidelines below when handling the monitor stand.

Note: Please make sure that the stand is firmly attached to the monitor before raising it upright, and then remove the bolt.
Before installing the stand

Installing the Stand

Stand installation process
Note: For safety and to ensure optimal performance, please position the monitor on a flat, stable surface. Failure to do so may lead to the monitor falling, causing damage to the monitor itself and/or posing a risk of personal injury.

Removing the Stand and Mounting the Monitor

Refer to the table below for the standard dimensions for mounting kits.

Note:
  • For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
  • Mounting kits are sold separately.
Maximum Loading Hole Pattern
(W x H) 		Interface Pad
(W x H x D) 		Pad Hole Screw Specification Screw Quantity
14 kg 100 x 100 mm N/A Ø 5 mm M4 x 10 mm 4 screws
  1. Turn off the monitor and disconnect all cables.
  2. Place the monitor on a flat, stable surface with the screen facing down.
  3. Remove the monitor stand.
    Monitor stand removal
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four screws (M4 x 10 mm).
    VESA mounting holes
  5. Follow the instructions that come with the optional wall mounting kit to mount the monitor.

Using the Security Slot

To help prevent the monitor from being stolen, use a security slot locking device to secure the monitor to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

Using the security slot lock
Retrieved from "https://manuals.viewsonic.com/index.php?title=VG2208A-HD_Initial_Setup&oldid=44605"