LS741HD Specifications: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
VY (talk | contribs)
VY (talk | contribs)
No edit summary
 
Line 278: Line 278:


[[Category:LS741HD]]
[[Category:LS741HD]]
[[Category:LS Series]]

Latest revision as of 07:28, 24 May 2024


Technical Specifications

Item Category Specifications
Projector Type Laser
Display Size 30"~300"
Throw Ratio 1.4~2.24
(100" @3.10 m)
Lens F=2.5~3.26, f=20.911~32.62 mm
Display System 1-CHIP DMD
Input Signal HDMI (v. 1.4) fh: 15~102 kHz, fv:23~120 Hz, Pixel rate: 165 MHz
Resolution Native 1920 (H) x 1080 (V)
Power Input Voltage DC IN 100-240V, 50/60 Hz (auto switch)
Operating Conditions Temperature 0°C to 40°C (32°F to 104°F)
Humidity 10% to 80% (non-condensing)
Altitude 0 to 760 m (0 to 2,500 ft.) at 0°C to 40°C (32°F to 104°F)
760 to 1,520 m (2,500 to 5,000 ft.) at 0°C to 35°C (32°F to 95°F)
1,520 to 3,048 m (5,000 to 10,000 ft.) at 0°C to 30°C (32°F to 86°F)
Storage Conditions Temperature -20°C to 60°C (-4°F to 140°F)
Humidity 5% to 90% (non-condensing)
Altitude 0 to 12,100 m (0 to 40,000 ft.)
Dimensions Physical
(W x H x D)
286 x 216 x 129 mm
(11.26” x 8.50” x 5.08”)
Weight Physical 3.0 kg (6.61 lbs)
Power Consumption On[1] 210W (Typical)
Off < 0.5W (Standby)
  1. The test condition follows EEI standards.

Projector Dimensions

286 mm (W) x 129 mm (H) x 216 mm (D)

Timing Chart

Video Input

Timing Resolution H-frequency
(kHz)
V-frequency
(Hz)
Doc Clock Frequency
480i 720(1440) x 480 15.73 59.94 27
480p 720 x 480 31.47 59.94 27
720/50p 1280 x 720 37.50 50 74.25
720/60p 45.00 60 74.25
1080/24P 1920 x1080 27.00 24 74.25
1080/50i 28.13 50 74.25
1080/60i 33.75 60 74.25
1080/50P 56.25 50 148.50
1080/60P 67.50 60 148.50

PC Input

Signal Resolution Refresh Rate
(Hz)
H-frequency
(Hz)
Clock
(MHz)
720 x 400 720 x 400_70 70.09 31.47 28.32
800 x 600 SVGA_56 56.25 35.16 36.00
SVGA_60 60.32 37.88 40.00
SVGA_72 72.19 48.08 50.00
SVGA_75 75.00 46.88 49.50
1024 x 768 XGA_60 60.00 48.36 65.00
XGA_70 70.07 56.48 75.00
XGA_75 75.03 60.02 78.75
1152 x 870 1152 x 870_75 75.00 67.50 108.00
1280 x 1024 SXGA_60 60.02 63.98 108.00
SXGA_75 75.03 79.98 135.00
1280 x 960 1280 x 960_60 60.00 60.00 108.00
1440 x 900 WXGA+_60 59.89 55.94 106.50
1680 x 1050 1680 x 1050_60 59.95 65.29 146.25
640 x 480
@67Hz
MAC13 66.67 35.00 30.24

3D Support

HDMI 3D
Frame Packing Format
Timing Resolution Refresh Rate (Hz)
1080p 1920 x 1080 24
720p 1280 x 720 50 / 60
Side by Side Format
Timing Resolution Refresh Rate (Hz)
1080i 1920 x 1080 50 / 60
Top and Bottom Format
Timing Resolution Refresh Rate (Hz)
1080p 1920 x 1080 24
720p 1280 x 720 50/60

LED Indicators

When the warning indicators (see below) light up or flash, the projector will automatically shutdown. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicators light up or flash, please contact your nearest service center for assistance.

Status and Description Power Indicator Light Temperature Indicator Light Light Source Indicator Light
Red Blue or Green Red Red
Standby State
(Power cord input)
Steady Light
Power On
(Warming)
Flashing Light
(0.5 sec off/0.5 sec on)
Power On and Lamp Lighting Steady Light
Power Off
(Cooling)
Flashing Light
(0.5 sec off/0.5 sec on)
Back to red steady light when the cooling fan turns off.
Error
(Lamp Failure)
Flashing Steady Light
Error
(Fan Failure)
Flashing Flashing Light
Error
(Overheat)
Flashing Steady Light