• Print Print

VController Using the Application: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
No edit summary
 
(7 intermediate revisions by the same user not shown)
Line 3: Line 3:
|1=vController_Initial_Setup
|1=vController_Initial_Setup
|2=vController_Using_the_Application
|2=vController_Using_the_Application
|3=vController_Advanced_Features
|3=vController_Start_Up
|4=vController_Appendix
|4=vController_Setting
|5=vController_Schedule
|6=vController_Command_Mode
}}
}}
</noinclude>
</noinclude>
=Introduction=
=Introduction=
vController 2.0 integrates RS-232 and LAN command for displays and projectors.
vController 2.0 integrates RS-232 and LAN command for displays and projectors.
*'''Start Up'''
*[[vController_Start_Up|Start Up]]
*'''Setting'''
*[[vController_Setting|Setting]]
*'''Schedule'''
*[[vController_Schedule|Schedule]]
 
<noinclude>
=Start Up=
=Video Introduction=
Display or Projector selection provides RS-232 or LAN communication connection, display identity code, switching the machine on and off, and the input signal settings.
<youtube>0JIvw3IMZjM</youtube>
 
</noinclude>
==Select Device==
<div class="res-img"><div class="res-img">Press the '''Display Icon''' [[File:vController_Monitor_Icon.png|40px|link=]] to control a display or the '''Projector Icon''' [[File:vController_Projector_Icon.png|40px|link=]] to control a projector.</div></div><br />
::<div class="res-img">[[File:vController_Start_Up_1.png|400px]]</div>
 
==RS-232 Settings==
#<div class="res-img">Press the '''Return Button''' [[File:vController_Return_Icon.png|30px|link=]] to search for the RS-232 connection ports and then select a corresponding hardware connection port.</div>
::*Default baud rate is 9600.
<ol start="2"><li><div class="res-img">Press the '''Share Button''' [[File:vController_Share_Icon.png|30px|link=]] to connect to the RS-232. When the RS-232 has been successfully connected, the button will turn green.</div></li></ol><br />
::<div class="res-img>[[File:vController_Start_Up_2.png|700px]]</div>
 
==Network Settings==
<ol><li>Enter the IP address of the monitor in the IP address field.</li>
<div class="res-img">[[File:vController_Network_1.png|700px]]</div>
<li><div class="res-img">When the network settings interface is opened, press the '''Ping Button''' [[File:vController_Ping_Icon.png|30px|link=]] to check if the connection is successful.</div></li>
:<div class="res-img">[[File:vController_Network_2.png|150px]]</div>
*Default port number is 5000.
<li><div class="res-img">Press the '''Share Button''' [[File:vController_Share_Icon.png|30px|link=]] to connect to the network. When the network connection has been successful, the button will turn green.</div></li></ol>
 
==Start==
{| style="text-align:center;"
|-
| <div class="res-img">[[File:vController_Start_Monitor_Interface.png]]</div>
| <div class="res-img">[[File:vController_Start_PJ_Interface.png]]</div>
|-
|'''Display Start Interface'''
|'''Projector Start Interface'''
|}
===Display Identification Number (ID)===
Create ID numbers when connecting to displays via RS-232C. A unique ID should be created for each display. Check '''All''' when connecting to multiple displays.
:'''NOTE:''' Only displays support ID numbers. Projectors do not support ID numbers.
 
===ID Group===
<ol><li>Check '''Group'''.</li>
<li>Enter ID numbers in the text field.</li>
</ol>
 
===On/Off Buttons===
:Press the '''On Button'''[[File:VController_PowerOn_Icon.jpg|On Button]] to turn on the display. <br />
:Press the '''Off Button'''[[File:VController_PowerOff_Icon.jpg|Off Button]] to turn off the display.
:{| class="wikitable" width="50%"
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-
|style="text-align:center;|[[File:VController_PowerOn_Icon.jpg]]
|Display has turned on successfully.
|-
|style="text-align:center;|[[File:VController_PowerOn_Icon_GreenLine.jpg]]
|Display has failed to turn on / display's status is unknown.
|-
|style="text-align:center;|[[File:VController_PowerOff_Icon.jpg]]
|Display has turned off successfully.
|-
|style="text-align:center;|[[File:VController_PowerOff_Icon_RedLine.jpg]]
|Display has failed to turn off / display's status is unknown.
|}
 
===Source Menu===
<ol><li>Select video source with the pull-down menu</li>
<div class="res-img"><li>Press the '''Source Button''' [[File:VController_Source_Icon.jpg]] to switch the input signal.</div></li>
</ol>
 
===IP Group===
<ol><li>Press the '''IP Button'''[[File:VController_IPGroup_Icon.jpg]] to set the IP group. <br / >
[[File:vController_IP_Group_Icon.png|200px]]</li>
 
<li>Enter the IP address of the display or projector in the IP address field.</li>
</ol>
::{| class="wikitable" width="50%"
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-style="text-align:center;"
| [[File:vController_Add_Icon.jpg]]
| style="text-align:left" | Add IP address into group.
|-style="text-align:center;"
| [[File:vController_Remove_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Remove IP address from group.
|- style="text-align:center;"
| [[File:vController_Up_Icon.jpg]]
| style="font-weight:normal; text-align:left;" | Move up the focus IP address.
|-style="text-align:center;"
| [[File:vController_Down_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Move down the focus IP address.
|-style="text-align:center;"
| [[File:vController_Check_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Enable all IP address.
|-style="text-align:center;"
| [[File:vController_Disable_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Disable all IP address.
|-style="text-align:center;"
| [[File:vController_X_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Close IP group windows.
|}
 
=Setting=
==Setting / Getting Buttons==
===Setting Button===
Press to the '''Setting Button''' [[File:vController_Source_Icon_Set.jpg]] to set the RS-232 or LAN commands.
:{| class="wikitable" style="font-weight:bold" width="50%"
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-style="text-align:center;"
| [[File:vController_Source_Icon_Green_Set.jpg]]
| style="font-weight:normal; text-align:left" | Command was successfully read.
|- style="text-align:center;"
| [[File:vControllervController_Source_Icon_Red_Set.jpg]]
| style="font-weight:normal; text-align:left;" | Command was not set / command is not supported.
|-style="text-align:center;"
| [[File:vControllervController_Source_Icon_Yellow_Set.jpg]]
| style="font-weight:normal; text-align:left" | Command is still processing.
|}
===Getting Button===
Press to the '''Getting Button''' [[File:vController_Source_Icon.jpg]] to read the RS-232 or LAN commands.
:{| class="wikitable" width="50%"
|-
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-
|style="text-align:center;"|[[File:vController_Source_Icon_Green.jpg]]
|Command was successfully read.
|-
|style="text-align:center;"|[[File:vController_Source_Icon_Red.jpg]]
|Command was not set / command is not supported.
|-
|style="text-align:center;"|[[File:vControllervController_Source_Icon_Yellow.jpg]]
|Command is still processing.
|}
 
==Monitor Setting==
===Setup===
:<div class="res-img">[[File:vController_Setup_1.png|550px]]</div>
:{| class="wikitable" width="60%" style="text-align:center;"
|-
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Item
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Function Description
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Commands Supported
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Devices Supported
|-
| '''OSD Language'''
| Select the language for the OSD interface.
| Write
| All devices
|-
| '''Power Lock'''
| Button used to activate or de-activate the power source.
| Write/Read
| All devices
|-
| '''Button Lock'''
| Button used to activate or de-activate the control panel buttons.
| Write/Read
| All devices
|-
| '''Menu Lock'''
| Button used to activate or de-activate the main menu buttons.
| Write/Read
| All devices
|-
| '''DTV Channel'''
| Select the digital TV channel.
| Write
| TV types
|-
| '''ATV Channel'''
| Select the analog TV channel
| Write
| TV types
|-
| '''Remote Control'''
| Choose whether to switch the remote control on/off or select the IR pass through mode. When the IR pass through mode has been activated, the name of the button would be displayed in the RC display frame when the remote control is pressed.
| Write/Read
| All devices
|-
| '''Set-Up Wizard'''
| Choose whether to switch the set-up wizard on/off (only for TV devices)
| Write/Read
| TV types
|-
| '''Restore Default'''
| Return all settings to the default factory settings
| Write
| All devices
|-
| '''Ack'''
| Tests the communication connections
| Write
| All devices
|}
 
===Picture===
:<div class="res-img">[[File:vController_Setup_2.png|550px]]</div>
:{| class="wikitable" width="60%" style="text-align:center;"
|-
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Item
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Function Description
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Commands Supported
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Devices Supported
|-
| '''Contrast'''
| Adjust contrast to improve display quality.The black portions of the image would be blacker, while the white portions would be whiter.
| Write/Read
| All devices
|-
| '''Brightness'''
| Adjust brightness of the image displayed.
| Write/Read
| All devices
|-
| '''Sharpness'''
| Adjust and improve the image sharpness.
| Write/Read
| All devices
|-
| '''Backlight'''
| Adjust the panel backlights
| Write/Read
| All devices
|-
| '''Color'''
| Increase or decrease the color strength of the image.
| Write/Read
| All devices
|-
| '''Tint'''
| Increase or decrease the tint of the image. Increasing tint will make the image greener, while decreasing tint will make the image appear more purple.
| Write/Read
| All devices
|-
| '''Color Mode'''
| Select the warmth of the color used for the image. Low-warmth images would appear slightly red, while high-warmth images would appear slightly blue.
| Write
| All devices
|-
| '''Picture Size'''
| Select picture size.
| Write
| All devices
|}
 
===Audio===
:<div class="res-img">[[File:vController_Setup_3.png|550px]]</div>
:{| class="wikitable" width="60%" style="text-align:center;"
|-
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Item
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Function Description
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Commands Supported
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Devices Supported
|-
| '''Sound'''
| Switch the SRS effects on or off.
| Write
| All devices
|-
| '''Bass'''
| Increase or decrease the bass volume.
| Write
| All devices
|-
| '''Treble'''
| Increase or decrease the treble volume.
| Write
| All devices
|-
| '''Balance'''
| Adjust the balance of the left and right channels.
| Write
| All devices
|-
| '''Volume'''
| Increase or decrease the monitor volume.
| Write/Read
| All devices
|-
| '''Mute'''
| Mute or unmute the monitor speakers.
| Write/Read
| All devices
|}
 
===Tiling===
This function allows users to establish a large array of displays (TV walls). This function requires daisy chain connections. The maximum number of displays to be arranged horizontally/vertically would depend on the specifications of the displays used.
:<div class="res-img">[[File:vController_Setup_4.png|550px]]</div>
:{| class="wikitable" width="60%" style="text-align:center;"
|-
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Item
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Function Description
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Commands Supported
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Devices Supported
|-
| '''Tiling-Mode'''
| Swith on / off Tiling-Mode.
| Write/Read
| TV wall type (CDX)
|-
| '''Tiling-Compensation'''
| Turn on / off the tiling-compensation function. When switched on, the monitors would adjust the image to compensate for the width of the border frames and provide an accurate and precise display of the images.
| Write/Read
| TV wall type (CDX)
|-
| '''Tiling-H by V Monitors'''
| Select the number of monitors in the horizontal / vertical directions.
| Write/Read
| TV wall type (CDX)
|-
| '''Tiling Position'''
| Designate the position of the monitor in the monitor tiling matrix.
| Write/Read
| TV wall type (CDX)
|}
 
===KeyPad===
:<div class="res-img">[[File:vController_Setup_5.png|550px]]</div>
:{| class="wikitable" width="60%" style="text-align:center;"
|-
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Item
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Function Description
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Commands Supported
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" |Devices Supported
|-
| style="text-align:center;|[[File:VController_Power_Button.jpg|50px]] <br />'''Power On Button'''
| Press this button to power on device.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_PowerOff_Button.jpg|50px]]<br />'''Power Off Button'''
| Press this button to power off device.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Menu_Button.jpg|50px]]<br />'''Menu Button'''
| Press this button to access the OSD menu.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Volume_Down_Button.jpg|50px]]<br />'''Volume Down Button'''
| Press this button to decrease the audio output level.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Volume_Up_Button.jpg|50px]]<br />'''Volume Up Button'''
| Press this button to increase the audio output level.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Mute_Button.jpg|50px]]<br />'''Mute Button'''
| Press this button to turn the mute function on / off.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Source_Switch.jpg|150px]]<br />'''Source Switch Buttons'''
| Press these buttons to select the input source.
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Number_Buttons.jpg|150px]]<br />'''0 - 9 Buttons'''
| Select the desired number by pressing the 0 - 9 buttons
| Write
| All devices
|-
| style="text-align:center;|[[File:VController_Arrow_Buttons.jpg|50px]]<br />'''Arrow Buttons and Enter Button'''
| Use to '''Arrow Buttons''' to adjust the selected item in the OSD interface. Press the '''ENTER Button''' to confirm the action.
| Write
| All devices
|}
 
===Macro===
:<div class="res-img">[[File:vController_Setup_6.png|550px]]</div>
The user can define three (3) components:
# '''Group Name'''
# '''Edit Macro Group Commands'''
# '''Run Macro Group Commands'''
<br />
<u>'''Group Name'''</u>
 
 
 
<u>'''Edit Macro Group Commands'''</u>
 
 
 
<u>'''Run Macro Group Commands'''</u>
 
==Projector Setting==
 
 
===Setup===
 
 
===Picture===
 
 
===Audio===
 
 
===Keypad===
 
 
===Macro===
 
 
=Schedule=
 


{{#seo:
{{#seo:
Line 428: Line 26:
}}
}}


[[Category:VController]]
[[Category:vController]]

Latest revision as of 06:19, 23 January 2026

VController Using the Application
Initial Setup
Using the Application
Start Up
Setting
Schedule
Command Mode
Customer Service

Introduction

vController 2.0 integrates RS-232 and LAN command for displays and projectors.

Video Introduction

Retrieved from "https://manuals.viewsonic.com/index.php?title=VController_Using_the_Application&oldid=58008"