• Print Print

VController Using the Application: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
No edit summary
No edit summary
 
(59 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<noinclude>
<noinclude>   {{DISPLAYTITLE:vController Using the Application}}
{{Sticky_Menu_Projector_Software
{{Sticky_Menu_Projector_Software
|1=vController_Initial_Setup
|1=vController_Initial_Setup
|2=vController_Using_the_Application
|2=vController_Using_the_Application
|3=vController_Advanced_Features
|3=vController_Start_Up
|4=vController_Appendix
|4=vController_Setting
|5=vController_Schedule
|6=vController_Command_Mode
}}
}}
</noinclude>
</noinclude>
=Introduction=
=Introduction=
vController 2.0 integrates RS232 and LAN command for monitors and projectors.
vController 2.0 integrates RS-232 and LAN command for displays and projectors.
*'''Start Up'''
*[[vController_Start_Up|Start Up]]
*'''Setting'''
*[[vController_Setting|Setting]]
*'''Schedule'''
*[[vController_Schedule|Schedule]]
=Start Up=
<noinclude>
==Select Drive==
=Video Introduction=
<ol><li>Press the '''Monitor Icon''' [[File:VController_Monitor_Icon.jpg|Monitor Icon]] to control the monitor or the '''Projector Icon''' [[File:VController_Projector_Icon.jpg|Projector Icon]] to control the projector.<br />
<youtube>0JIvw3IMZjM</youtube>
[[File:VController_Start_Up1.PNG]]</li></ol>
</noinclude>
==RS232 settings==
<ol><li>Press the '''Return Button''' [[File:VController_Return_Icon.jpg|Return Icon]] to search for the RS232 connection ports and then select a corresponding hardware connection port.</li>
*Default baud rate is 9600.
<li>Press the '''Share Button''' [[File:VController_Share_Icon.jpg|Share Icon]] to connect to the RS232. When the RS232 has been successfully connected, the button will turn green.
[[File:VController_Start_Up2.PNG]]</li></ol>
==Network Settings==
<ol><li>Enter the IP address of the monitor in the IP address field.</li>
[[File:VController_Network1.PNG]]
<li>When the network settings interface is opened, press the '''Ping Button''' [[File:VController_Ping_Icon.jpg|Ping Icon]] to check if the connection is successful.</li>
*Default port number is 5000.
[[File:VController_Network2.jpg]]
<li>Press the '''Share Button''' [[File:VController_Share_Icon.jpg|Share Icon]] to connect to the RS232. When the RS232 has been successfully connected, the button will turn green.</li></ol>
</ol>
==Start==
===Monitor ID===
:Create ID numbers when connecting to monitors via RS232C. A unique ID should be created for each monitor. Check '''All''' when connecting to multiple monitors.
:'''NOTE:''' Only monitors support ID numbers. Projectors don't use ID numbers.
===ID Group===
<ol><li>Check '''Group'''.</li>
<li>Enter ID numbers in the text field.</li>
</ol>
===On/Off Buttons===
:Press the '''On Button'''[[File:VController_PowerOn_Icon.jpg|On Button]] to turn on the monitor. <br />
:Press the '''Off Button'''[[File:VController_PowerOff_Icon.jpg|Off Button]] to turn off the monitor.
:{| class="wikitable" style="font-weight:bold;" width="50%"
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-
| [[File:VController_PowerOn_Icon.jpg]]
| style="font-weight:normal;" | Monitor has turned on successfully.
|-
| [[File:VController_PowerOn_Icon_GreenLine.jpg]]
| style="font-weight:normal;" | Monitor has failed to turn on / monitor's status is unknown.
|- style="text-align:center;"
| [[File:VController_PowerOff_Icon.jpg]]
| style="font-weight:normal; text-align:left;" | Monitor has turned off successfully.
|-
| [[File:VController_PowerOff_Icon_RedLine.jpg]]
| style="font-weight:normal;" | Monitor has failed to turn off / monitor's status is unknown.
|}
===Source Menu===
<ol><li>Select video source with the pull-down menu</li>
<li>Press the '''Source Button'''[[File:VController_Source_Icon.jpg]] to switch the input signal.
</ol>
===IP Group===
<ol><li>Press the '''IP Button'''[[File:VController_IPGroup_Icon.jpg]] to set the IP group. <br / >
[[File:VController_Network2.jpg]]</li>


<li>Enter the IP address of the monitor or projector in the IP address field.</li>
{{#seo:
</ol>
|title=ViewSonic Software
:{| class="wikitable" style="font-weight:bold" width="50%"
|title_mode=append
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
|keywords=vController, software, start up, settings, schedule, features, identity
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
|description=Using the vController software with compatible devices.
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
}}
|-style="text-align:center;"
| [[File:vController_Add_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Add IP address into group.
|-style="text-align:center;"
| [[File:vController_Remove_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Remove IP address from group.
|- style="text-align:center;"
| [[File:vController_Up_Icon.jpg]]
| style="font-weight:normal; text-align:left;" | Move up the focus IP address.
|-style="text-align:center;"
| [[File:vController_Down_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Move down the focus IP address.
|-style="text-align:center;"
| [[File:vController_Check_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Enable all IP address.
|-style="text-align:center;"
| [[File:vController_Disable_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Disable all IP address.
|-style="text-align:center;"
| [[File:vController_X_Icon.jpg]]
| style="font-weight:normal; text-align:left" | Close IP group windows.
|}
=Setting=
==Setting / Getting Buttons==
===Setting Button===
Press to the '''Setting Button''' [[File:vController_Source_Icon_Set.jpg]] to set the RS232 or LAN commands.
:{| class="wikitable" style="font-weight:bold" width="50%"
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-style="text-align:center;"
| [[File:vController_Source_Icon_Green_Set.jpg]]
| style="font-weight:normal; text-align:left" | Command was successfully read.
|- style="text-align:center;"
| [[File:vControllervController_Source_Icon_Red_Set.jpg]]
| style="font-weight:normal; text-align:left;" | Command was not set / command is not supported.
|-style="text-align:center;"
| [[File:vControllervController_Source_Icon_Yellow_Set.jpg]]
| style="font-weight:normal; text-align:left" | Command is still processing.
|}
===Getting Button===
Press to the '''Getting Button''' [[File:vController_Source_Icon.jpg]] to read the RS232 or LAN commands.
:{| class="wikitable" style="font-weight:bold" width="50%"
|- style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;"
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Icon
! style="text-align:center; background-color:#c41230; color:#ffffff; font-weight:bold;" | Description
|-style="text-align:center;"
| [[File:vController_Source_Icon_Green.jpg]]
| style="font-weight:normal; text-align:left" | Command was successfully read.
|- style="text-align:center;"
| [[File:vController_Source_Icon_Red.jpg]]
| style="font-weight:normal; text-align:left;" | Command was not set / command is not supported.
|-style="text-align:center;"
| [[File:vControllervController_Source_Icon_Yellow.jpg]]
| style="font-weight:normal; text-align:left" | Command is still processing.
|}
==Setup==


[[Category:VController]]
[[Category:vController]]

Latest revision as of 06:19, 23 January 2026

VController Using the Application
Initial Setup
Using the Application
Start Up
Setting
Schedule
Command Mode
Customer Service

Introduction

vController 2.0 integrates RS-232 and LAN command for displays and projectors.

Video Introduction

Retrieved from "https://manuals.viewsonic.com/index.php?title=VController_Using_the_Application&oldid=58008"