• Print Print

VController Using the Application: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
No edit summary
No edit summary
 
(64 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<noinclude>
<noinclude>   {{DISPLAYTITLE:vController Using the Application}}
{{Sticky_Menu_Projector_Software
{{Sticky_Menu_Projector_Software
|1=vController_Initial_Setup
|1=vController_Initial_Setup
|2=vController_Using_the_Application
|2=vController_Using_the_Application
|3=vController_Advanced_Features
|3=vController_Start_Up
|4=vController_Appendix
|4=vController_Setting
|5=vController_Schedule
|6=vController_Command_Mode
}}
}}
</noinclude>
</noinclude>
=User Interface=
=Introduction=
vController 2.0 integrates RS232 and LAN command for monitors and projectors.
vController 2.0 integrates RS-232 and LAN command for displays and projectors.
*'''Start Up'''
*[[vController_Start_Up|Start Up]]
*'''Setting'''
*[[vController_Setting|Setting]]
*'''Schedule'''
*[[vController_Schedule|Schedule]]
==Start Up==
<noinclude>
===Select Drive===
=Video Introduction=
<ol><li>Press the '''Monitor Icon''' [[File:VController_Monitor_Icon.jpg|Monitor Icon]] to control the monitor or the '''Projector Icon''' [[File:VController_Projector_Icon.jpg|Projector Icon]] to control the projector.<br />
<youtube>0JIvw3IMZjM</youtube>
[[File:VController_Start_Up1.PNG]]</li></ol>
</noinclude>
===RS232 settings===
 
<ol><li>Press the '''Return Button''' [[File:VController_Return_Icon.jpg|Return Icon]] to search for the RS232 connection ports and then select a corresponding hardware connection port.</li>
{{#seo:
*Default baud rate is 9600.
|title=ViewSonic Software
<li>Press the '''Share Button''' [[File:VController_Share_Icon.jpg|Share Icon]] to connect to the RS232. When the RS232 has been successfully connected, the button will turn green.
|title_mode=append
[[File:VController_Start_Up2.PNG]]</li></ol>
|keywords=vController, software, start up, settings, schedule, features, identity
===Network Settings===
|description=Using the vController software with compatible devices.
<ol><li>Enter the IP address of the monitor in the IP address field.</li>
}}
[[File:VController_Network1.PNG]]
 
<li>When the network settings interface is opened, press the '''Ping Button''' [[File:VController_Ping_Icon.jpg|Ping Icon]] to check if the connection is successful.</li>
[[Category:vController]]
*Default port number is 5000.
[[File:VController_Network2.jpg]]
<li>Press the '''Share Button''' [[File:VController_Share_Icon.jpg|Share Icon]] to connect to the RS232. When the RS232 has been successfully connected, the button will turn green.</li></ol>
</ol>

Latest revision as of 06:19, 23 January 2026

VController Using the Application
Initial Setup
Using the Application
Start Up
Setting
Schedule
Command Mode
Customer Service

Introduction

vController 2.0 integrates RS-232 and LAN command for displays and projectors.

Video Introduction

Retrieved from "https://manuals.viewsonic.com/index.php?title=VController_Using_the_Application&oldid=58008"