VX2718-2KPC-MHDJ Specifications

From ViewSonic Documentation
Jump to: navigation, search

Technical Specifications

Item Category Specifications
Model P/N. VX2718-2KPC-MHDJ
No. VS18401
LCD Type Color a-Si TFT Active Matrix 2560 x 1440 LCD;

0.0777 (H)mm x 0.2332 (V)mm pixel pitch

Display Size 68.6 cm, 27"
Color Filter RGB vertical stripe
Glass Surface Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal Video Sync

TMDS digital (100 Ω)

DisplayPort: fh:30~243 kHz, fv:48~165 Hz
HDMI: fh:30~222 kHz, fv:48~144 Hz
Compatibility PC up to 2560 x 1440
Macintosh up to 2560 x 1440
Resolution[1] Recommended 2560 x 1440 @ 144Hz
Supported
  • 2560 x 1440 @ 60, 100, 120, 144, 165Hz
  • 1920 x 1080 @ 50, 60, 100, 120Hz
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1440 x 576 @ 50Hz
  • 1400 x 1050 @ 60, 75Hz
  • 1366 x 768 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 50, 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 60Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 75Hz
  • 1024 x 768 @ 50, 60, 70, 75Hz
  • 848 x 480 @ 60Hz
  • 832 x 624 @ 75Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 640 x 480 @ 60, 66, 72, 75Hz
Power[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan
(H x V)
596.74 x 335.66 mm

(23.49” x 13.21”)

Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 10% to 90% (non-condensing)
Altitude 16,000 feet (5 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40,000 feet (12.1 km)
Dimensions Physical
(W x H x D)
610.5 x 430~560 x 225.7 mm

(24.0” x 16.9~22.0” x 8.9”)

Wall Mount Dimensions 75 x 75 mm
Weight Physical 4.25 kg (9.37 lbs.)
Power Saving Modes On[3] 26W (Typical)
Off ≤ 0.3W
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. Please use the power adapter from ViewSonic® or an authorized source only.
  3. The test condition follows EEI standards.