VX2716 Specifications

From ViewSonic Documentation
Jump to: navigation, search

Technical Specifications

Model No. P/N
VS19053 VX2716
Item Category Specifications
LCD Type IPS, Color a-Si TFT,

Active Matrix 1920 x 1080 LCD;
0.3114 mm x 0.3114 mm pixel pitch

Display Size 69 cm, 27"
Color Filter RGB vertical stripe
Glass Surface Hard coating (3H), Anti-Glare (Haze 25%)
Input Signal Video Sync TMDS digital (100 Ω)
HDMI (v. 1.4): fh:24-115 kHz, fv:48-100 Hz
DisplayPort (v. 1.2): fh:24-115 kHz, fv:48-100 Hz
Compatibility PC up to 1920 x 1080
Macintosh up to 1920 x 1080
Recommended 1920 x 1080 @ 60Hz
Resolution[1] Supported
  • 1920 x 1080 @ 50, 60, 75, 100Hz
  • 1680 x 1050 @60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1440 x 576 @ 50Hz
  • 1400 x 1050 @ 60, 75Hz
  • 1366 x 768 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 50, 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 60, 75Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 900 @ 66Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 60, 75Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75Hz
  • 1024 x 600 @ 60Hz
  • 848 x 480 @ 60Hz
  • 832 x 624 @ 75Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 66, 72, 75Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power Adapter[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan

(H x V)

597.9 x 336.3 mm

(23.5” x 13.2”)

Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 20% to 90% (non-condensing)
Altitude 16,404 feet (4.9 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40, 000 feet (12.1 km)
Dimensions Physical

(W x H x D)

611.9 x 432.5 x 237.3 mm

(24.1” x 17” x 9.3”)

Audio Speaker 2W x 2
Wall Mount Dimensions 100 x 100 mm
Weight Physical 4.8 kg (10.6 lbs)
Power Saving Modes On[3] 19W (Typical) without audio

20W (Typical) with 50% audio

Off ≤ 0.3W
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. Please use the power adapter from ViewSonic® or an authorized source only.
  3. The test condition follows EEI standards.