• Print Print

VP2776

From ViewSonic Documentation
Jump to: navigation, search

Package Contents

  1. Monitor
  2. Power cord
  3. Video cable
  4. Quick start guide

Front View / Rear View

  • Front View
    Front View
  • Rear View
    Rear View
Letter Item
A Display Screen
B Joy Key
C Power Button
D Security Slot

I/O Ports

I/O Ports
Number Item
1 AC IN
2 HDMI
3 DisplayPort
4 USB Type-C
5 Audio Out
6 USB Type-B (Upstream)
7 USB Type-C 5V/3A
8 USB Type-A (Downstream)
9 Micro USB

Product Overview - ColorPro™ Wheel

ColorPro Wheel
Number Item
1 Confirm Button
2 Dial
3 Grip
4 Back Button
5 Lens Cap
6 Lens
7 Adjustable Weight

Stand Installation

  1. Place the monitor on a flat, stable surface with the screen facing down.
  2. Align and slide the upper hooks of the monitor stand into the stand mounting slots.
  3. Lift the device into its upright position on a flat, stable surface.
  • Align the points
  • Secure the Base and Neck
  • Lift into an upright position


Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.

For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum Loading Hole Pattern (W x H) Interface Pad (W x H x D) Pad Hole Screw Specification & Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Pull down slightly to disengage the hooks and remove the stand.
    • Disengage the hooks
    • Remove the stand
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
  5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
VESA mounting points


Installing the Shade Hood

  1. Place the monitor upright on a flat, stable surface. Make sure the monitor is rotated to the landscape mode.
  2. Prepare the shade hood by folding the side panels down.
  3. Attach the shade hood to the top of the monitor by aligning the shape bar inside the hood with the one on top of the monitor. Repeat for the left and right sides.
  4. Press down on the shade hood to fix it firmly in place.

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

Using the Security Slot

Connecting to Power

Connecting to Power
  1. Connect the power cord to the AC IN jack at the rear of the device.
  2. Connect the power cord plug to a power outlet.

Connecting External Devices

Note: To connect the monitor to an external device (PC, laptop…etc.), please use one of the included video cables for your application and connect it to both terminals.
  • HDMI Connection
    HDMI Connection
  • DisplayPort Connection
    DisplayPort Connection
  • USB Connection
    USB Connection
  • Audio Connection
    Audio Connection

HDMI

Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.

NOTE: The monitor is equipped with two HDMI 2.0 ports.

DisplayPort

Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the cable to the DisplayPort or mini DP port of your computer.

NOTE: To connect the monitor to the Thunderbolt port (v. 1&2) on your Mac, connect the mini DP end of the “mini DP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.

USB

Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.

USB Number Description
Type A Two (2) Connection for your Type A peripheral device(s). (e.g., storage device).
NOTE: To use some peripherals, please ensure your computer is also connected to the monitor’s USB Type B port.
Type B One (1) Connect the USB Type B male cable (square with 2 cut corners) to this port, and then connect the other end of the cable to the USB downstream port of your computer.
Type C Two (2) Make sure your Type C output device and cable support video signal transmission.
NOTE: Only the Type-C port supports video transmission; the Type-C 5V/3A port only supports power delivery and data transmission.
Micro USB One (1) For use with the ColorPro™ Wheel.

Audio Connection

Plug the audio jack of the ear-/headphones into the Audio Out port of the monitor. Additionally, you can connect the monitor to a sound bar using an audio cable.

NOTE: The monitor is also equipped with dual speakers.

Connecting the ColorPro™ Wheel

Connect the USB Type A and Micro USB cable of the ColorPro™ Wheel to the USB Type A and Micro USB port of the monitor.

  • Height Adjustment
    Height Adjustment
  • Swivel Adjustment
    Swivel Adjustment
  • Tilt Angle Adjustment
    Tilt Angle Adjustment

Height Adjustment

Lower or raise the monitor to the desired height (0 to 130 mm).

NOTE: When adjusting, press down firmly along the adjustment track holding the monitor with both hands on the side.

Swivel Adjustment

Swivel the monitor to the left or right for the desired viewing angle (60˚).

Tilt Angle Adjustment

Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 21˚).

NOTE: When adjusting, support the stand firmly with one hand while tilting the monitor forwards or backwards with the other hand.

Screen Orientation Adjustment (Monitor Pivot)

  • Screen Orientation Adjustment
    Screen Orientation Adjustment
  • Screen Orientation Adjustment
    Screen Orientation Adjustment
  • Screen Orientation Adjustment
    Screen Orientation Adjustment
  1. Adjust the monitor height to the highest position. Then tilt the monitor backwards to the full tilt position.
  2. Rotate the monitor 90° clockwise or counter clockwise from landscape to portrait orientation.

NOTE:
  • When adjusting, make sure to hold both sides of your monitor firmly with both hands.
  • If using the Auto Pivot function, the system can detect the screen orientation automatically.

Turning the Device On/Off

Power Button
  1. Plug the power cord into a power outlet.
  2. Press the Power button to turn on the monitor.
  3. To turn the monitor off, press the Power button again.
NOTE: The monitor will still consume some power as long as the power cord is connected to the power outlet. If the monitor is not being used for a long period of time, please disconnect the power plug from the power outlet.

Using Joy Key

Use the Joy Key to access the Startup Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change the settings.

Joy Key

Startup Menu

Move the Joy Key ◄ to activate the Startup Menu.

NOTE: Follow the key guide that appears on the screen to select the option or make adjustments.
Quick Menu


  • Main Menu
    Main Menu
  • Color Mode
    Color Mode
  • ViewMode
    ViewMode
  • Brightness
    Brightness
  • Input
    Input
  • Volume
    Volume
Name Description
Main Menu Enter the On-Screen Display (OSD) Menu.
Color Mode Select one of the preset standard color settings.
ViewMode Select one of the preset display settings.
Brightness Adjust the brightness level.
Input Select the input source.
Volume Adjust the volume settings.

Hot Keys

When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the Joy Key.

Key Description
Press and hold the key for 5 seconds to activate/deactivate LED lighting.
Press and hold the key to lock/unlock the OSD Menu.

When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the OSD Menu.

Press and hold the key to lock/unlock the Power button.

When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the Power button.

Press and hold the key for 10 seconds to display/hide the boot up screen when the device is turned on.
Press and hold the key for 10 seconds to activate/deactivate Ultra Fast.
Press and hold the key for 2 seconds to activate the KVM feature.

ColorPro™ Wheel Hot Keys

Apart from the Joy Key, the ColorPro™ Wheel also provides a quick way to access special functions when the On-Screen Display (OSD) Menu is off.

Key Description
Press and hold the key for 2 seconds to activate/deactivate LED lighting.
Press the key to activate the KVM feature when in PBP Mode.

General Operation

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
Display the OSD Menu
  1. Move the joy key ▲ or ▼ to select the main menu. Then press the ● key to enter the selected menu.
Display the OSD Menu
  1. Move the joy key ▲ or ▼ to select the desired menu option. Then press the ● key to enter the sub-menu.
Display the OSD Menu
  1. Move the joy key ▲ or ▼ to adjust/select the setting. Then press the ● key to confirm.
Display the OSD Menu
  1. Move the joy key ◄ to return to the previous menu.

ColorPro™ Wheel for OSD Control

Apart from the Joy Key, the ColorPro™ Wheel also provides a quick way to control and access the OSD menus.

Using the ColorPro™ Wheel

Enter the On-Screen Display (OSD) Menu
Enter the OSD Menu by pressing the Confirm Button.

Select an Option and Confirm
Rotate the Dial to select an option, and press the Confirm Button to confirm.

Adjust the Value
Rotate the Dial left or right to adjust the value of the selected option.

Back
Press Back Button the at any time to return to the previous option.

OSD Tree

Input Select

Sub-menu Menu Option
DisplayPort Color Format Auto
RGB (Full Range)
RGB (Limited Range)
YUV (Full Range)
YUV (Limited Range)
DisplayPort 1.4 On
Off
HDMI 1 Color Format Auto
RGB (Full Range)
RGB (Limited Range)
YUV (Full Range)
YUV (Limited Range)
HDMI 2.0 On
Off
HDMI 2 Color Format Auto
RGB (Full Range)
RGB (Limited Range)
YUV (Full Range)
YUV (Limited Range)
HDMI 2.0 On
Off
Type C Color Format Auto
RGB (Full Range)
RGB (Limited Range)
YUV (Full Range)
YUV (Limited Range)
USB 3.2 On
Off
DisplayPort 1.4 On
Off
Auto Detect On
Off

Color Mode

Sub-menu Menu Option
DCI-P3 Brightness (-/+, 0~100)
Color Temperature 9300K
7500K
6500K
6300K
5000K
Gamma 1
1.4
1.8
2.2
2.4
2.6
Sharpness (-/+, 0~100)
Aspect Ratio 1:1
4:3
Full Screen
Uniformity On
Off
Recall
sRGB Brightness (-/+, 0~100)
Color Temperature 9300K
7500K
6500K
6300K
5000K
Gamma 1
1.4
1.8
2.2
2.4
2.6
Sharpness (-/+, 0~100)
Aspect Ratio 1:1
4:3
Full Screen
Uniformity On
Off
Recall
REC709 Brightness (-/+, 0~100)
Color Temperature 9300K
7500K
6500K
6300K
5000K
Gamma 1
1.4
1.8
2.2
2.4
2.6
Sharpness (-/+, 0~100)
Aspect Ratio 1:1
4:3
Full Screen
Uniformity On
Off
Recall
DICOM-SIM Sharpness (-/+, 0~100)
Aspect Ratio 1:1
4:3
Full Screen
User Contrast (-/+, 0~100)
Brightness (-/+, 0~100)
Color Temperature 9300K
7500K
6500K
6300K
5000K
Gamma 1
1.4
1.8
2.2
2.4
2.6
Advanced DCR (-/+, 0/25/50/75/100)
Gain Red (-/+, 0~100)
Green (-/+, 0~100)
Blue (-/+, 0~100)
Offset Red (-/+, 0~100)
Green (-/+, 0~100)
Blue (-/+, 0~100)
Hue Red (-/+, 0~100)
Green (-/+, 0~100)
Blue (-/+, 0~100)
Cyan (-/+, 0~100)
Magenta (-/+, 0~100)
Yellow (-/+, 0~100)
Sharpness (-/+, 0~100)
Aspect Ratio 1:1
4:3
Full Screen
Blue Light Filter (-/+, 0~5)
Uniformity On
Off
Recall

ViewMode

Sub-menu Menu Option
CAD/CAM Ultra Clear (-/+, 0~4)
Advanced-Sharpness (-/+, 0~100)
Advanced-Gamma (-/+, 1.8~2.6)
Video Edit Ultra Clear (-/+, 0~4)
Advanced-Sharpness (-/+, 0~100)
Advanced-Gamma (-/+, 1.8~2.6)
Animation Ultra Clear (-/+, 0~4)
Advanced-Sharpness (-/+, 0~100)
Black Stabilization (-/+, 0~10)
Photographer Ultra Clear (-/+, 0~4)
Advaned-Sharpness (-/+, 0~100)
Advanced-Gamma (-/+, 1.8~2.6)
FPS 1
FPS 2
RTS
MOBA

Audio Adjust

Sub-menu Menu Option
Volume (-/+, 0~100)
Mute On
Off
Audio Input DisplayPort
HDMI 1
HDMI 2
Type C

Setup Menu

Sub-menu Menu Option
Language Select English
Français
Deutsch
Español
Italiano
Suomi
Русский
Türkçe
日本語
한국어
繁體中文
简体中文
Adaptive Sync On
Off
Resolution Notice On
Off
PureXP™ On
Off
Information
OSD Timeout (-/+, 5/15/30/60)
OSD Background On
Off
OSD Pivot Auto
0°
+90°
-90°
180°
Power Indicator On
Off
Auto Power Off On
Off
Sleep 30 minutes
45 minutes
60 minutes
120 minutes
Off
Multi-Picture Off
PBP Left-Right Left Source Select DisplayPort
HDMI 1
HDMI 2
Type C
Right Source Select DisplayPort
HDMI 1
HDMI 2
Type C
Swap
PIP PIP Source Select DisplayPort
HDMI 1
HDMI 2
Type C
PIP Position PIP H. Position
PIP V. Position
PIP Size (-/+, 0~100)
Swap
Dual Color DCI-P3
sRGB
REC709
DICOM-SIM
User
CAL 1
CAL 2
CAL 3
CAD/CAM
Video Edit
Animation
Photographer
FPS 1
FPS 2
RTS
MOBA
ECO Mode Standard
Optimize
Conserve
Energy Saving On
Off
Overscan On
Off
Response Time Standard
Advanced
Ultra Fast
USB Charging On
Off
Backstage Lighting Level 1
Level 2
Level 3
Off
Burn-in Eraser On
Off
DDC/CI On
Off
Rename
All Recall

Input

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Input. Then press the ● key to enter the Input menu.
  3. Move the joy key ▲ or ▼ to select the desired input source. Then press the ● key to confirm the selection.

Color Mode

Menu Option Description
DCI-P3 Precise color gamut and gamma of DCI-P3 standard.
sRGB Precise color gamut and gamma of sRGB standard.
REC709 Precise color gamut and gamma of ITU-R Rec. 709 standard.
DICOM-SIM Gamma curves are set to a DICOM simulation.
User Custom, user-defined settings.
CAL1/CAL2/CAL3 Display with the 1st/2nd/3rd user calibration mode.
HDR Reduce the overall contrast of a given scene so that detail in the highlights and shadows can be seen.
  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Color Mode. Then press the ● key to enter the Color Mode menu.
  3. Move the joy key ▲ or ▼ to select the desired option. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to adjust/select the setting, and press the ● key to confirm the selection (if applicable).

ViewMode

Menu Option Description
CAD/CAM Select this option for viewing graphic design files.
Video Edit Select this option for video editing.
Animation Select this option for animation.
Photographer Select this option for viewing photo files.
FPS 1 Ideal for First-Person Shooter games.
FPS 2 Ideal for First-Person Shooter games.
RTS Ideal for Real-Time Strategy games.
MOBA Select this option for Multiplayer Online Battle Arena games.
  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select ViewMode. Then press the ● key to enter the ViewMode menu.
  3. Move the joy key ▲ or ▼ to select the desired option. Then press the ● key to enter its sub-menu.

Audio Adjust

Menu Option Description
Volume Adjust the volume level.
Mute Enable this option to temporarily turn off the sound.
Audio Input Select the audio input source.
  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Audio Adjust. Then press the ● key to enter the Audio Adjust menu.
  3. Move the joy key ▲ or ▼ to select the desired option. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to adjust/select the setting, and press the ● key to confirm the selection (if applicable).

Setup Menu

Menu Option Description
Language Select Select an available language for the OSD Menu.
Adaptive Sync Eliminates stuttering and tearing during gameplay.
Resolution Notice Enable this option to allow the system to inform users that the current viewing resolution is not the correct native resolution.
PureXP™ Short for “Pure Experience”, this feature can enhance the visual quality of moving objects, making them less vague with a clearer view.
Information Display the monitor information.
OSD Timeout Set the length of time the OSD Menu remains on screen.
OSD Background Show/Hide the OSD background when the OSD Menu appears on the screen.
OSD Pivot Set the OSD Menu orientation.
  • Auto: With the built-in G sensor, the OSD Menu can automatically pivot when the monitor is positioned vertically.
  • 0°: Sets the OSD Menu without a pivot.
  • +90°: Sets the OSD Menu with a +90° pivot.
  • 90°: Sets the OSD Menu with a -90° pivot.
  • 180°: Sets the OSD Menu with a 180° pivot.
Power Indicator Set the Power Indicator On or Off. If the setting is set to On, the power indicator lights blue when the device is turned on.
Auto Power Off Enable this option to allow the monitor to automatically turn off after a certain amount of time.
Sleep Set the amount of idle time before the monitor enters Sleep mode.
Multi-Picture Off

Disable this function.

PBP Left-Right
Display two windows, a 1x1 split screen, side-by-side on the left and right of the screen. User can specify the input source for each screen.

PIP
Split the screen into two parts, a main window and an inset window. User can specify the input source for each screen.

Dual Color
Display two different color settings in PIP or PBP mode.

ECO Mode Choose between various modes, based on power consumption.
Overscan Enable this option to automatically enlarge the original picture horizontally and vertically to an equal aspect ratio that fills the screen.
Response Time Adjust the response time, creating smooth images without streaking, blurring or ghosting. A low response time is perfect for the most graphic-intense gaming, and provides amazing visual quality while watching sports or action movies.
USB Charging Enable/disable usb charging.
Backstage Lighting Adjust the LED lighting.
Burn-in Eraser Reduce image burn-in.
DDC/CI Enable this option to allow the monitor control via the graphics card.
Rename Rename the personalized custom profile.
All Recall Resets all settings to their default values.
  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Setup Menu. Then press the ● key to enter the Setup Menu menu.
  3. Move the joy key ▲ or ▼ to select the desired option. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to adjust/select the setting, and press the ● key to confirm the selection (if applicable).

HDR (High-Dynamic-Range)

Reduces the overall contrast of a given scene so that detail in the highlights and shadows can be seen.

Ensure the HDR setting is turned on on your device first before enabling the HDR10 on the monitor. For example, the HDR setting on Xbox One S or PS4 Pro needs to be turned on first before enjoying your HDR10 video content.
HDR (High-Dynamic-Range)

To enable the HDR function:

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Color Mode. Then press the ● key to enter the Color Mode menu.
  3. Move the joy key ▲ or ▼ to select HDR. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to select one of the options . Then press the ● key to confirm.

KVM

The KVM function allows the user to control two computers connected to the same monitor from a single keyboard and mouse.

Only applicable in PBP (Picture-by-Picture) mode.

To connect the two computers to the monitor:

  1. Connect one end of the USB Type C cable to the USB Type C port of the monitor. Then connect the other end of the cable to the USB Type C port of the notebook.
  2. Connect one end of a DisplayPort cable to the DisplayPort of the monitor. Then connect the other end of the cable to the DisplayPort or mini DP of the computer.
  3. Connect the USB Type B male cable (square with 2 cut corners) to the USB Type B port of the monitor. Then connect the other end of the cable to the USB port of the computer.

To enable PBP mode:

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select the Setup Menu menu. Then press the ● key to enter the menu.
  3. Move the joy key ▲ or ▼ to select Multi-Picture. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to select PBP Left-Right. Then press the ● key to enable PBP mode.

To activate the KVM function:

  1. Press and hold the ► key for two (2) seconds to activate the KVM function.
  2. Then you will be able to switch the cursor between the two screens (left/right window).

Auto Pivot

With the Auto Pivot function, the monitor can detect the image display and adjust the image’s orientation on the screen automatically when pivoting the screen vertically or horizontally.

NOTE: The Auto Pivot function uses DDC/CI to communicate with the monitor. Before applying the Auto Pivot function, please make sure the DDC/CI setting is set to On.

To enable the DDC/CI setting:

  1. Open the OSD Menu and select the Setup Menu menu. Then press the ● key to enter the menu.
  2. Move the joy key ▲ or ▼ to select DDC/CI. Then press the ● key to enter its sub-menu.
  3. Move the joy key ▲ or ▼ to select On. Then press the ● key to confirm.

After ensuring DDC/CI is On, proceed to set OSD Pivot to Auto:

  1. Open the OSD Menu and select the Setup Menu menu. Then press the ● key to enter the menu.
  2. Move the joy key ▲ or ▼ to select OSD Pivot. Then press the ● key to enter its sub-menu.
  3. Move the joy key ▲ or ▼ to select Auto. Then press the ● key to confirm.

Colorbration+

To ensure long-term color accuracy, some specific models support the hardware color calibration function. The Colorbration+ application installation file can be found at: http://color.viewsonic.com/support/software/.

Standard monitor packing does not include the color sensor, which the Colorbration+ application needs for the calibration process.

Compatible color sensors include:

  • X-Rite i1 Display Pro
  • X-Rite i1 Pro 2
  • X-Rite i1 Studio
  • Xrite Colormunki Photo
  • Xrite Colormunki Design
  • Datacolor Spyder 5
  • Datacolor SpyderX series

Dual Color

The monitor comes with a dual color engine to display two different color settings in PIP (Picture-in-Picture) or PBP mode. You can set different color presets in both windows (Main Window and Secondary Window).

NOTE: To enable PIP or PBP mode, refer to the Multi-Picture section.

To configure Dual Color:

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select the Setup Menu menu. Then press the ● key to enter the menu.
  3. Move the joy key ▲ or ▼ to select Multi-Picture. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to select Dual Color. Then press the ● key to enter its sub-menu.
  5. Move the joy key ▲ or ▼ to select the desired color setting. Then press the ● key to confirm.

Multi-Picture

Multi-Picture allows users to further customize their work space by allowing up to four split windows from different inputs, displaying high resolution content with different aspect ratios, without distortion from the original input sources.

To enable Multi-Picture mode:

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Color Mode. Then press the ● key to enter the Color Mode menu.
  3. Move the joy key ▲ or ▼ to select Multi-Picture. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to select PBP Left-Right or PIP. Then press the ● key to enter the selected mode.

PBP (Picture-by-Picture)

To configure PBP:

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Setup Menu. Then press the ● key to enter the Setup Menu menu.
  3. Move the joy key ▲ or ▼ to select Multi-Picture. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to select PBP Left-Right. Then press the ● key to enter its sub-menu.
  5. To change the input source, select the source location (Left Source Select/Right Source Select) and press the ● key.
  6. Move the joy key ▲ or ▼ to select the desired input source and press the ● key to confirm.
  7. To swap the two windows, select Swap and press the ● key to confirm.

PIP (Picture-in-Picture)

To configure PIP:

  1. Move the joy key ◄ to display the Startup Menu. Then navigate to Main Menu and press the ● key to display the OSD Menu.
  2. Move the joy key ▲ or ▼ to select Setup Menu. Then press the ● key to enter the Setup Menu menu.
  3. Move the joy key ▲ or ▼ to select Multi-Picture. Then press the ● key to enter its sub-menu.
  4. Move the joy key ▲ or ▼ to select PIP. Then press the ● key to enter its sub-menu.
  5. To change the input source for the Inset Window, select PIP Source Select and press the ● key. Then move the joy key ▲ or ▼ to select the desired input source and press the ● key to confirm.
  6. To adjust the Inset Window position, select PIP Position and press the ● key.
  • Press the ● key to select PIP H.Position or PIP V.Position.
  • Move the joy key ▲ or ▼ to adjust the setting and press the ● key to confirm.
  1. To adjust the Inset Window size, select PIP Size and press the ● key. Then move the joy key ▲ or ▼ to adjust the setting.
  2. To swap the two windows, select Swap and press the ● key to confirm.

Backstage Lighting

With the Backstage Lighting function, the monitor can adjust the LED brightness to the optimal settings.

To configure the Backstage Lighting settings:

  1. Open the OSD Menu and select the Setup Menu menu. Then touch the ● key to enter the menu.
  2. Move the joy key ▲ or ▼ to select Backstage Lighting. Then touch the ● key to enter its sub-menu.
  3. Move the joy key ▲ or ▼ to select Level 1, Level 2, or Level 3 to enable the function. Then touch the ● key to confirm.

Firmware Update

For the best display performance and to resolve any known issues, it is best to keep your monitor updated with the latest firmware version. With the supplied USB cable and the vDisplayManager application, you can easily update your monitor’s firmware.

To update the firmware:

  1. Download and install the vDisplayManager application: https://color.viewsonic.com/support/software/.
  2. Connect the USB Type B male cable (square with 2 cut corners) to the USB Type B port of your monitor. Then connect the other end of the cable to the USB port of the computer.
  3. Launch vDisplayManager. Select the Advanced tab in the side menu.
  4. Click Update to check for any updates to your monitor’s firmware.
  5. Wait until the update process is complete (if applicable).
NOTE: Any interruptions during the firmware update process may permanently damage your monitor. Do not disconnect the USB cable or turn off your PC and monitor.

What is Colorbration⁺?

Color accuracy is one of the most important aspects of the creative workflow and ensuring that your monitor’s color accurately represents the color of your original image or digital file is essential. The software allows you to:

  • Calibrate and profile your monitor quickly and easily.
  • Control white point, luminance, contrast ratio, gamma, and more.
  • Save time, money, guesswork, and frustration that generally comes with monitor calibration.
  • Focus on your work with complete confidence.

Where to Get Colorbration⁺?

The Colorbration⁺ software can be downloaded at: https://color.viewsonic.com/support/software
After the download completes, launch the Setup file and follow the on-screen directions to install the software.

Connection Methods

In addition to downloading the software, ensure that your monitor, computer and ColorPro™ Wheel are properly connected. There are two methods of connection for your monitor and computer:

HDMI or DisplayPort

Users with an HDMI or DisplayPort connection should also connect their monitor and computer via a USB Type B to USB Type A cable.

USB Type C

Users with a USB Type C connection can connect their monitor and computer directly.

Connecting the ColorPro™ Wheel

Connect the USB Type A and Micro USB cable of the ColorPro™ Wheel to the USB Type A and Micro USB port of the monitor.

Preparing for Color Calibration

  1. Ensure all connections have been made and are correct.
  2. Tilt your monitor slightly upwards.
  3. Remove the Lens Cap and carefully place the measurement device in contact with the monitor’s screen.

Using Colorbration+

Upon initially launching Colorbration⁺ the user will have two modes to choose from:

  • Basic Mode
  • Advanced Mode
NOTE: For more detailed information, please see the Colorbration+ user guide.

General Operation

To begin the Advanced Mode calibration process:

  1. Select Device Selection, then the monitor you wish to calibrate from the available options.
  2. Connect and select the measurement device you wish to use from the available options.
  3. Select Calibration on the Sidebar Menu.
  4. Choose your desired calibration settings from the drop-down menu, or create a custom profile
  5. Once the calibration settings have been chosen, select to begin the calibrating process.
  6. Wait until the color calibration process is complete.
NOTE: Any interruptions during the color calibration process may permanently damage your monitor color. Do not disconnect the USB cable or turn off your PC or monitor.

Technical Specifications

Model No. P/N
VS18610 VP2776
Item Category Specifications
LCD Type IPS type, TFT

Active Matrix 2560 x 1440 LCD, 0.2331 mm x 0.2331 mm pixel pitch

Display Size 68.47 cm, 27"
Color Filter RGB vertical stripe
Glass Surface Anti-Glare type, Hard Coating (3H)
Input Signal Video Sync TMDS digital (100 Ω)
HDMI: fh:15-204 kHz, fv:24-120 Hz
DisplayPort: fh:15-204 kHz, fv:24-120 Hz
Compatibility PC up to 2560 x 1440
Macintosh up to 2560 x 1440
Recommended 2560 x 1440 @ 165Hz
Resolution[1] Supported
  • 2560 x 1440 @ 60, 165Hz
  • 2048 x 1152 @ 60Hz
  • 1920 x 1440 @ 60Hz
  • 1920 x 1200 @ 60Hz
  • 1920 x 1080 @ 50, 60Hz
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1400 x 1050 @ 60, 75Hz
  • 1366 x 768 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 50, 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 60Hz
  • 1280 x 768 @ 50, 60Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 900 @ 67Hz
  • 1152 x 864 @ 75Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75Hz
  • 848 x 480 @ 60Hz
  • 800 x 600 @ 56, 60, 72Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 67, 72Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power Adapter[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan

(H x V)

596.74 x 335.66 mm

(23.49” x 13.21”)

Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 20% to 90% (non-condensing)
Altitude 16,404 feet (4.9 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40, 000 feet (12.1 km)
Dimensions Physical

(W x H x D)

613.70 x 569.36~449.36 x 234 mm

(24.16” x 22.42~17.69” x 9.21”)

Wall Mount Dimensions 100 x 100 mm
Weight Physical 9.55 kg (21.05 lbs)
Power Saving Modes On[3] 32W (Typical)
Off < 0.3W (Max)
  1. ↑ Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. ↑ Please use the power adapter from ViewSonic® or an authorized source only.
  3. ↑ The test condition follows EEI standards.

Compliance Information

This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Industry Canada Statement

CAN ICES-003(B) / NMB-003(B)

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.

The following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance Proposed Maximum Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6⁺) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%
Bis (2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%
Butyl benzyl phthalate (BBP) 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%


Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:

  • Lead as an alloying element in aluminum containing up to 0.4% lead by weight.
  • Copper alloy containing up to 4% lead by weight.
  • Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
  • Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life

ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.

USA & Canada:
https://www.viewsonic.com/us/go-green-with-viewsonic

Europe:
https://www.viewsonic.com/eu/environmental-social-governance/recycle

Taiwan:
https://recycle.moenv.gov.tw/

For EU users, please contact us for any safety/accident issue experienced with this product:

ViewSonic Europe Limited
Haaksbergweg 75
1101 BR Amsterdam
Netherlands
+31 (0) 650608655
EPREL@viewsoniceurope.com
https://www.viewsonic.com/eu/

Copyright Information

Copyright© ViewSonic® Corporation, 2021. All rights reserved.

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.

ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).

As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.

VP2776_UG_ENG_1c_20221128

Customer Service

Limited Warranty

Safety Precautions

Troubleshooting

Maintenance

Retrieved from "https://manuals.viewsonic.com/index.php?title=VP2776&oldid=57367"